How to get from Nanchang to Xiamen

1. How to get to Xiamen from Nanchang?

The advantage of Nanchang University is that it is located in the capital city of Jiangxi Province, and it is the only engineering university in Jiangxi Province, with 2 1 1, and the major of materials engineering and food safety is in the forefront of the country. The disadvantage is that it is not ranked high in the country and its popularity is not high.

Xiamen University has the following advantages: it is an old 985 and 2 1 1 engineering university with strong influence, beautiful school environment and good learning and living environment for students. The disadvantage is that the ranking has declined in recent years, and students are not as good as before.

2. What's the shortest way from Nanchang to Xiamen?

The railway line from Changsha to Xiamen has been basically determined.

Changfu (Xiamen) high-speed railway is planned as Nanchang-Nanping (connecting Hefei-Fuzhou high-speed railway)-Xiamen, with a speed of 350 kilometers per hour. Design and construction according to the standards of passenger dedicated line. The Nanping-Xiamen line is 250 kilometers long with a total investment of about 50 billion yuan. According to the Medium-and Long-Term Railway Network Planning of Fujian Province, the Nanchang-Xiamen (Fuzhou) high-speed railway is designed as a double track, with a total length of about 635km. The planned new line in Fujian has a total length of about 4 10km, a target speed of 350km/h and an investment budget of 62 billion yuan. The route leads from Nanchang Hub in Jiangxi, passes Jinxian, Fuzhou, Jinxi and Zixi, enters Guangze, Shaowu and Shunchang in Fujian, and finally ends in Fuzhou.

3. How far is it from Nanchang to Xiamen?

Fujian is about 568 kilometers away from Jiangxi. It takes 3 hours and 43 minutes by high-speed train. It takes 6 hours 1 1 minute to drive.

Fujian is located in the southeast of China, on the coast of the East China Sea. Its land area is between 2333 and 2820 north latitude and between 1 1550 and 12040 east longitude. It borders Taiwan Province Province in the east, Zhejiang Province in the northeast, Wuyishan in the northwest, Jiangxi Province in the northwest and Guangdong Province in the southwest, connecting the Yangtze River Delta and the Pearl River Delta. Jiangxi is located in the southeast of China, on the south bank of the middle and lower reaches of the Yangtze River, and belongs to East China. It is bounded by east longitude1133436-182858 and north latitude 2429 14-30044 1, and it is adjacent to Zhejiang and Fujian in the east. Even South Guangdong; Xiangxi; It borders Hubei and Anhui in the north and enjoys the Yangtze River.

: Today's 010-10:10s mail will arrive tomorrow night. If it is coming soon, it will be noon tomorrow.

4. How convenient is it to get from Nanchang to Xiamen Airport?

D236 1

D6525

D6529

G2048

G2295

G 1686

D2375

G237 1

G 1683

G5065

5. What is the most convenient way to get from Nanchang to Xiamen?

As of 65438+February 65438+June, there is no direct train from Taiyuan to Xiamen. At present, you can take the high-speed train to Shijiazhuang Station and Nanchang West Station and transfer twice. The train information from Taiyuan to Shijiazhuang in the south is as follows: the train information from Shijiazhuang to Nanchang in the west is as follows: the train information from Nanchang to Xiamen in the west is as follows:

How far is Nanchang from Xiamen?

Changfu (Xiamen) high-speed railway is planned to start from Nanchang East Station (using the planned Changfu intercity line). Passing Jinxian, Fuzhou, Jinxi, Zixi, Guangze, Shaowu, Shunchang and Yanping, it divides into two roads in Yanping. Fuxia uses the existing high-speed rail to build a new trunk line through Youxi, Dehua and Yongchun.

There is no medium and long-term railway network planning for high-speed railway in China, and relevant departments have not agreed to start the preliminary work of the project. Fujian is still striving for support to bring the Changfu-Xiamen high-speed railway into the relevant planning of China.

7. The route from Nanchang to Xiamen

More than 800 kilometers. The general speed train (general speed) should arrive in about 15 hours. If you are satisfied, please accept it.

: 20 14 12 10 8. Travel guide from Nanchang to Xiamen

Cooperate with China Railway Nanchang Railway Bureau to adjust the train diagram, and add Z 102/ 103 and Z104/10/0//train from Gaoqi to Changchun, passing through Fuxia, Yongpu, Changfu, Changjiu Intercity, Beijing-Kowloon and Beijing-Kowloon. After that, there will be no direct passengers from Xiamen to Northeast China.

Via: Xiamen North, Zhangzhou, Longyan, Ruijin, Ganzhou, Nanchang West, Jiujiang, Fuyang, Heze, Tianjin, Qinhuangdao, Jinzhou South, Shenyang North, Siping and Changchun.

9. Where does Xiamen pass from Nanchang?

Yes, 1. Just enter the home phone number to query the travel itinerary code, without adding it. Open the WeChat app first, click on the search bar at the top, and then enter the words travel code.

2. Click Search Travel Code, and then click Go.

1. bullet train, full name is bullet train, there are mountain type and intercity type. Refers to vehicles equipped with power devices in rail transit system, including locomotives and power cars. The bullet train has a driving wheel, and the corresponding vehicle without a driving device is a trailer. If the train can run normally on the track, there must be a moving car to provide enough traction for the whole train, but there is no need to hang a trailer without power. EMU is a railway vehicle equipped with wheel-driven machinery, not an EMU. There are not only motor trains, but also various types of vehicles in high-speed trains, including constant-speed EMUs, ordinary-speed trains, subway trains, light rail trains, monorails and maglev trains.

2. EMU generally refers to a rail vehicle that carries the operating load and has its own power; However, in modern power centralized EMUs, EMUs are closer to the role of locomotives in traditional trains, and generally do not carry operating loads. In China, trains with a speed of 200 and above and using CRH Harmony are called EMU.

EMU trains in China are divided into three grades: high-speed EMU (with a speed of 250 and above, marked G, which mainly corresponds to high-speed railway) and unlimited speed limit; Ordinary EMUs or medium-speed EMUs (marked D, speed 160 and 200km/h, mainly corresponding to high-speed railways) and low-speed EMUs (CSR Qingdao Company extends its technical capabilities and studies speed 140km/h to adapt to urban light rail).