How to carry and protect the tablet when traveling?

Without protective cover, foam protection is better. It's not a big problem to put it in your schoolbag, but you must pay attention to prevent squeezing. It is best to put the tablet computer in the middle of the book, with both sides fixed, and use the book as the protective cover of the tablet computer. Tablet computers are still easy to scratch, and it is best to protect them with film. Train vibration generally has no effect on tablet computers, but it will if the vibration is strong. Here are some protection methods for tablet computers.

Liquid crystal display (LCD panel)

* When the computer is not used for a long time, just turn off the power of the LCD screen temporarily through the function keys on the keyboard, which can save electricity and prolong the life of the screen.

* Please don't forcibly cover the LCD top cover or put any foreign matter between the keyboard and the display screen, so as to avoid damaging the internal components due to heavy pressure on the top cover glass.

* Don't touch the screen surface with nails and sharp objects (hard objects) to avoid scratches.

* The surface of LCD screen will absorb dust due to static electricity. It is recommended to buy a special wiping cloth for LCD screen to clean your screen. Don't pat with your fingers to avoid leaving fingerprints, please wipe gently.

* Don't use chemical cleaner to wipe the screen.

battery

* When there is no external power supply, if the card in the PCMCIA slot is not used at that time, it is recommended to unplug the card first to prolong the battery life.

* Room temperature (20-30 degrees) is the most suitable working temperature of the battery, and the working environment with too high or too low temperature will reduce the service life of the battery.

* It is incorrect to take out the battery to extend the battery life when using the notebook computer in an environment where a stable power supply can be provided. As far as ASUS notebook computer is concerned, when the battery is low, the charging circuit in the battery will automatically turn off, so it will not be overcharged.

* It is recommended to calibrate the battery charge once every three months on average.

* When using the AC adapter, please refer to the international voltage instructions.

Keyboard (keyboard)

* When dust accumulates, you can clean the gap with a small brush, or blow out the dust with a high-pressure spray tank that is usually used to clean the camera lens, or use a hand-held vacuum cleaner to remove the dust and debris on the keyboard.

* Clean the surface. You can dip a little detergent on the soft cloth and gently wipe the keyboard surface when you turn it off.

hard disc

* Try to use it in a stable state, and avoid operating the computer in a place that is easy to shake.

* Power-on and power-off process is the most vulnerable time of hard disk. At this time, the rotation speed of the hard disk bearing is not stable, and if vibration occurs, it is easy to cause track defects. Therefore, it is recommended to wait for about ten seconds after turning off the computer before moving the laptop.

* Reorganize and scan the disk once a month on average to improve the efficiency of disk access.

floppy disk drive

* Avoid using floppy disks with bad appearance or mildew.

* Buy floppy disk cleaning sheets and clean the read-write head regularly.

Optical drive (CD)

* Clean the laser reading head regularly with CD cleaning paper.

* Please put the CD into the CD-ROM drive with both hands. Hold the CD tray with one hand and fix the CD with the other hand to avoid the deformation of the CD tray.

Touch screen device

* Please keep your hands clean when using the touchpad to avoid the cursor running around.

* When the surface gets dirty accidentally, you can gently wipe the surface of the touchpad with the wet corner of a dry cloth. Don't wipe the surface with rough cloth and other objects.

* Touchpad is an inductive precision electronic component. Please don't write on the touch screen with sharp objects, and don't use it under heavy pressure to avoid damage.

heat dissipation

* Generally speaking, notebook computer manufacturers will reduce the high temperature in use by means of fans, heat pipes, large heat sinks and cooling holes.

* In order to save electricity and avoid noise, the fan of the notebook computer is not always running, but will only start when the CPU reaches a certain temperature.

* Placing the notebook computer on soft objects, such as beds and sofas, may block the cooling holes and affect the cooling effect, thus reducing the operating efficiency and even crashing.

Maintenance of other components (others)

Before cleaning and maintenance, please follow the following steps to maintain your laptop and related peripherals:

* Step 1: Turn off the power supply, unplug the external power cord, and unplug the internal battery and all external devices.

* Step 2: Use a small vacuum cleaner to remove the dust from the gap between the connector and the keyboard.

* Step 3: Wet the shell surface slightly with a dry cloth, and then gently wipe the shell surface. Please be careful not to drop any detergent into the machine to avoid short circuit burns.

* Step 4: Wait until the laptop is completely dry before turning on the power.