Sharing of Minesweeper Classic Guide Rules and Clearance Tips

How should novices play Minesweeper Classic Edition? Many new players are not sure yet. Here are the rules and clearance tips for Minesweeper Classic Edition. Let’s take a look.

Minesweeper classic version strategy guide

First give the rules of minesweeper:

Minesweeper rules:

The numbers represent the number of the eight surrounding grids. Thunder.

Victory conditions:

Click on all the grids that are not mines.

Basic operations:

Infer the location of the mine based on numbers

Click: Click to open the grid

Long press: Do a good job on the mine Mark

Click on the number: When the number is equal to the number of mines marked in the eight surrounding grids, other grids will be clicked.

The following are some mine-sweeping formulas that can quickly deduce the location of mines.

121

The middle is not thunder, the two sides are thunder.

12 formula

As shown in the picture above, according to the minesweeping rules, the distribution of mines on the left can be easily derived. It can be understood that because the middle of the red box is 1, so the red There will only be one mine in the three squares on the left side of the frame. Similarly, there will be two mines on the left side of the purple frame, and they are distributed in two blue frames.

Look carefully at the picture below:

Did you find the place where 12 is together?

In fact, there are two places in the lower left corner. The 3 at the bottom excludes the upper left corner. The thunder, with the 1 on the right, forms 21.

The 11 on the side

The 1 on the side (upper right corner) indicates that there is only one mine around, and the 1 below indicates that there are no mines in the three new grids, so you can rest assured. point.

At this time, we will find that the 12 on the left is also 11 except for the target mine.

Also

1 | 13 | 1 | 31

31 | 1 | 13 | 1

This situation is also very good Judgment

Results that can be deduced based on numbers.

Symmetry

When the numbers on both sides of the symmetry axis are the same, the number of surrounding mines is also the same.

As shown in the picture below, when the right side is 2, there is no mine around, and when the left side is also 2, you can rest assured.