Qualified rate of travel shoes quality

AQSIQ randomly selected 87 products produced by 87 enterprises in Fujian, Guangdong, Zhejiang, Jiangsu and Shanghai.

The results of quality supervision and spot check of travel shoes show that the sampling pass rate of this product is 78.2%. The results of spot check show that the qualified rate of product sampling in this spot check of large enterprises reaches100%; The pass rate of small enterprise products sampling inspection is only 59.5%. The product quality level of small enterprises is still the main factor restricting the improvement of the overall quality level of travel shoes in China.

The main quality problems of spot check: some products are unqualified in folding resistance; The peeling strength of individual products is unqualified, and the sneakers with unqualified peeling strength are easy to open during wearing. In addition, Fujian Nan 'an Zuhao Shoes and Clothing Co., Ltd. refused to inspect in the national supervision and spot check, and the product quality was found to be unqualified. Poor folding resistance is a common quality problem of travel shoes.

According to the national standard, after the folding test, the crack length is ≤ 15.0mm, and the new crack is ≤ 5.0 mm. In this spot check, 24 products are unqualified in folding resistance. After the folding test of these products, the glue on the bottom wall or the cracks and new cracks on the soles exceeded the standard. However, after the folding performance test of some products, the crack length reached 69.7mm and the new crack length was 32.3 mm

The national standard also stipulates that after the wear test, the wear mark length of the product sole is ≤ 10.0 mm, and 19 products are unqualified in this spot check. After wear resistance test, the length of wear marks on the soles of these products exceeds the index, and some products even reach15.1mm.