Traditional Culture Encyclopedia - Travel guide - Can the hammer hit the side of the padlock and break it open?

Can the hammer hit the side of the padlock and break it open?

The side of the padlock breaks easily. Break the padlock with a hammer. The specific operation is as follows:

1, Step 1: Fasten the middle of the lock with your left index finger first, and be sure to fasten it firmly. As shown in the figure:

2. Step 1: Hold the middle of the lock with the index finger of the left hand, and then press the lock body with the thumb and ring finger of the left hand, as shown in the figure:

3. Step 3: Then hit the lock head with a hammer and keep hitting the side of the lock hard. When knocking at the door, the index finger, thumb and ring finger must be locked according to the above gestures.

4. Step 4: Knock the lock edge hard for about 10 minutes, and the lock will become loose. Keep knocking for 5 minutes, and you will find that the lock has automatically popped up a little distance. As shown in the figure:

5. Step 5: Pull the lock head upward with force. When the lock head deviates from 90 degrees, it means that the padlock has been completely broken and the operation is completed.

Extended data

Padlock type:

1, stainless steel padlock: This kind of padlock is characterized by its strong oxidation resistance and is suitable for outdoor use, but it is rarely used in China because of its difficult processing and high cost.

2. Copper padlock: The main material of locks is copper, and small copper padlocks are widely used.

3, iron padlock: it is very common to use.

A. Electroplated iron padlock: watch lock.

B, gray iron padlock: the surface is treated with gray paint, and later there are many colored padlocks, all of which belong to this category.

C. Imitation copper padlock: Actually, it belongs to electroplated iron padlock, that is, the surface is plated with copper.

4. Zinc alloy padlock: This kind of padlock is integrally molded by die casting machine with high precision.