Traditional Culture Encyclopedia - Travel guide - Product introduction of Eptek Machinery Equipment (Shanghai) Co., Ltd.
Product introduction of Eptek Machinery Equipment (Shanghai) Co., Ltd.
Working principle: when working, the motor drives the eccentric shaft to rotate through the belt pulley, so that the movable jaw periodically approaches and leaves the fixed jaw, thus crushing the material in various ways, such as squeezing, rubbing and grinding, so that the material changes from large to small and gradually falls down until it is discharged from the discharge port.
Product features:
The crushing ratio is large and the product granularity is uniform.
Simple structure and reliable operation,
Simple maintenance and low operation cost. As a secondary crushing equipment, PF impact crusher can handle all kinds of materials with particle size less than 500mm and compressive strength less than 360Mpa. It has the characteristics of large crushing ratio, high crushing efficiency and convenient maintenance. The finished product is cubic, which is an ideal processing equipment for aggregate used in advanced highway pavement and hydropower construction. Impact crusher is widely used in the fields of expressway construction, water conservancy project and building sand processing for its excellent performance and good service performance.
Working principle:
Series products use impact energy to crush materials. When working, the rotor is driven by the motor to rotate at high speed, and the material entering from the feed inlet collides with the lining plate on the rotor and is crushed by the high-speed impact of the lining plate; The crushed material is hit on the lining and crushed again; Finally, it is discharged from the discharge port. By adjusting the gap between the impact frame and the rotor frame, the particle size and shape of the material can be changed. Two EP-TEC boilers have been put into operation, increasing the heating capacity by 3 million square meters.
Product features:
High crushing ratio,
High chromium plate hammer,
Hydraulic or manual opening,
Excellent, stress-free, cubic discharge. The movable cone is lifted by a single hydraulic cylinder, which realizes many functions such as adjusting the discharge port, cleaning the cavity, over-iron, overload protection and so on. Equipped with electronic intelligent ore drawing control system to realize more production process control and job optimization functions.
Working principle:
When SHC cone crusher works, the rotation of motor rotates around a fixed point under the force of eccentric sleeve through pulley or coupling, transmission shaft of cone crusher and cone part of cone crusher. Therefore, the crushing wall of the crushing cone is close to and far from the surface of the mortar wall fixed on the adjusting sleeve, and the ore is constantly impacted, squeezed and bent in the crushing cavity, thus realizing the crushing of the ore.
Product features:
Advanced design, automatic hydraulic adjustment,
Stable and reliable, high crushing efficiency and low loss,
Convenient operation and maintenance, long service life and high cost performance.
The hydraulic cone crusher is equipped with a hydraulic system, and all components can be disassembled from the top or side, and the fixed cone and the movable cone assembly can be disassembled conveniently. Bronze sliding bearing can maintain excellent bearing performance under high impact and vibration crushing environment, which is more economical and convenient to maintain than rolling bearing. The movable cone is lifted by a single hydraulic cylinder, which realizes many functions such as adjusting the discharge port, cleaning the cavity, over-iron, overload protection and so on. Equipped with electronic intelligent ore drawing control system to realize more production process control and job optimization functions.
Working principle:
Driven by the motor, the pulley drives the big gear to rotate through the pinion, and then drives the spindle to rotate through the eccentric sleeve, so that the broken wall and the mortar wall are separated from each other from time to time, and the materials in the middle are broken under the splitting, cracking and pressure of the two, and discharged from the discharge port. The lubricating oil circuit is divided into two parts. One part rises from the bottom along the spindle and eccentric bushing to the bowl-shaped tile and the big gear, joins with another part of the oil path from the transmission shaft and flows back to the thin oil lubrication station together. Product features:
High reliability and good stability,
Convenient maintenance and simple operation,
Low operation cost and wide application range,
Laminated crushing has a good particle shape. The wearing parts are made of new high-quality multi-element high-alloy wear-resistant materials, which ensures the superior wear resistance and impact resistance of the hammer head and liner. This series crusher runs smoothly, with low dust and low power consumption.
Scope of application:
The equipment is widely used in chemical industry, building materials, metallurgy, mining, coal preparation, sand making and refractory industries. It can efficiently grind limestone, cement clinker, iron ore, shale, dolomite, granite, gypsum and mixed materials.
Product features:
Ultra-high fine grinding: increase the particle size adjustment device to ensure that the discharged particle size is ≤3mm, accounting for 85%;
High efficiency and energy saving: the energy consumption of motor is reduced by 40% under the same output;
Ultra-long service life: the ultra-high alloy combined hammer can be turned over and used, and the average service life is increased by 4 times;
Large crushing ratio: clinker can be primary and secondary, and limestone can be combined into primary crushing. PCKW series reversible hammer crusher, also known as grate-less hammer crusher, combines the advantages of impact crusher, fine crusher and two-stage crusher, and further innovates its structural form, which is the replacement product of two-stage crusher without sieve bottom. Widely used in brick making, mining, metallurgy, coal, electricity and other coal gangue and shale industries to produce new wall materials. This machine can crush mineral or viscous materials with compressive strength less than 150 MPa and surface moisture less than 12%. Especially for artificial sand making system, it is a new crusher that can be used first. Symmetrical adjustable impact frames are arranged on both sides of the rotor to ensure the discharging granularity. The rotor diameter is large, the hammer handle is long, and the proportion of fine materials is less than or equal to 5 mm, accounting for 80%;
Product features:
Efficient and energy-saving,
The hammer handle is a split combined composite hammer with long service life.
Less downtime,
Simple maintenance, the machine can be equipped with hydraulic opening device, which is more convenient to replace wearing parts.
Scope of application:
Suitable for medium hardness and low grade iron ore, limestone, coal gangue, quartz stone and other materials. PCL/VSI series sand makers actively crush basalt, goose soft stone, andesite, granite and other bone materials to produce artificial sand by dry method. This series of sand making machine consists of mechanical body, feed pipe, impact plate, vertical shaft with rotor and motor. The impact plate installed inside the machine body is made of special high chromium cast iron, which has strong wear resistance and is convenient to replace without bolts. Air circulation devices are installed on both sides of the feed inlet, so that the wind generated by the rotation of the rotor circulates in the circulation device to reduce the amount of dust discharged to the outside. The rotor is equipped with a wear-resistant sleeve pad, which can prolong the service life, reduce the number of worn parts of the mechanical body and reduce the operating cost. Due to the adjustment of balance, the high-speed rotating rotor achieves the effect of low noise, low vibration and high efficiency in sand making.
Working principle:
The material to be crushed enters from the top feed inlet and falls to the center of the high-speed rotating rotor. The falling materials are thrown out at high speed under the strong centrifugal force of the rotor, and the impact plate hitting the inside of the main engine is shattered. When installing the impact plate, the thrown materials collide with the impact plate at right angles to give full play to its excellent crushing performance. Crushed artificial sand is discharged from the lower part of the sand making machine.
Product features:
Good crushing performance and low operating cost,
Less wearing parts, convenient replacement,
The wearing parts made of special high chromium cast iron or superhard alloy have long service life,
The impact plate can be inverted, and the installation position can be adjusted at the same time, so that the sand-making yield is high.
Low noise, small vibration, less dust discharged, reducing public hazards. Hydraulic double-roll crusher, also known as double-roll crusher, is a new type of stone crusher product. This crusher combines the advantages of traditional roller crusher and the working principle of roller mill, and makes full use of the design concept of mechanical and electro-hydraulic integration, so that the crushing efficiency and stability of products are significantly improved, the pressure of hydraulic system is stable, the adjustment is convenient, and it is more safe and reliable. It is the first choice equipment for high efficiency and energy saving in cement, mining, metallurgy, quarrying, sand making and other industries. The roller is welded by a large roller press, and the hardness of the roller surface is greater than or equal to HRC60. In this hydraulic system, the average particle size of roller crusher is less than or equal to 3mm, accounting for 65 ~ 95%. The granularity of finished products can be adjusted hydraulically according to customer's requirements.
Use fields:
H hydraulic roller crusher is suitable for coarse and medium crushing of brittle block materials in cement, chemical industry, electric power, mining, metallurgy, building materials, refractories, coal mines and other industries, with large feeding particle size and adjustable discharging particle size, and can crush materials with compressive strength ≤ 160MPa. Especially in the coal industry, using this machine to crush raw coal can be directly crushed as long as iron and impurities are removed, and the crushed material has uniform particle size and low over-crushing rate, thus simplifying the coal preparation process and reducing the investment and production cost.
Performance characteristics:
The broken roller adopts hydraulic control system, which can choose different pressures according to the hardness of the material, so that the mechanical force can squeeze and crush the material more fully and effectively;
The hydraulic roller crusher adopts sensing technology to ensure overload and pressure relief, and the equipment is safer and more reliable;
The roller surface of hydraulic roller crusher adopts international advanced hard surface treatment technology, which greatly improves the service life;
The invention has the advantages of stable performance, low operating cost and simple maintenance. This machine is suitable for high fine grinding of more than 680 kinds of non-flammable and explosive materials such as barite, limestone, ceramics and slag. Its Mohs hardness is not more than 9.3, and its temperature is lower than 6%. The granularity of the finished product can be adjusted within the range of 60- 1250 mesh (the thinnest can reach 2500 mesh). 10-60 mesh coarse powder can be produced by adding special devices in the machine.
Working principle:
In the high-pressure mill, a high-pressure spring with a pressure of 1000- 1500 kg is fastened to the roller hanger. After starting work, the grinding roller rotates around the main shaft and rolls near the grinding ring under the action of high-pressure spring and centrifugal force. The rolling pressure is 1.2 times higher than that of raymond mill under the same power condition, and the output is greatly improved. When the ground material enters the grinding cavity, it is scooped up by the shovel and sent between the grinding roller and the grinding ring for rolling. The rolled powder is brought into the analyzer with the circulating wind of the blower, and the qualified fine powder enters the cyclone powder collector with the airflow to become the finished product, and the large-particle material falls back for grinding again. The circulating air returns to the blower to repeat the above process, and the remaining air enters the bag filter for purification. When the grinding roller and the grinding ring are worn to a certain extent, the length of the high-pressure spring is adjusted to keep a constant grinding pressure between the grinding roller and the grinding ring, thus ensuring stable output and fineness. YK/DF series vibrating screen is a new type of multi-layer circular motion vibrating screen designed according to the mechanical principle, which is designed for screening materials in mines. At the same time, it is also widely used in the classification of coal preparation, building materials, electric power, chemicals, railways, transportation, cement and other materials.
Product features:
1, strengthen the excitation and increase the screening ability;
2, high screening efficiency and low vibration noise;
3, the fuselage structure is novel, durable and easy to maintain. Two boilers of EP-TEC were started, which increased the heating energy by 3 million square meters. Iptec's ZSW vibrating feeder can transport the bulk and granular materials from the silo to the receiving device evenly, regularly and continuously in the production process. In the sand and gravel production line, the crushing machine can be continuously and evenly fed, and the materials can be roughly screened. Widely used in metallurgy, coal mine, mineral processing, building materials, chemicals, abrasives and other industries of crushing and screening combined equipment.
2065438+On March 8, 2005/KLOC-0, Iptek was invited to Shanghai Maritime University to participate in the overseas promotion and sharing meeting of Google.
On March 9, 20 15, a compound cone crusher PYFD- 13 10 was sent to Fujian.
On March 6, 20 15, Iptek "Quality Miles" was launched.
On March 4th, 2005, the annual output of Iptek was 1000 m3. The screening production line is sent to Guizhou.
2065438+February 2005, the company organized employees to travel to Zhoushan, Zhejiang. 20 14 12 and Iptek 400-800TPH basalt production lines were put into production in Guizhou, and the new HX- 1200 molding machine was put into use.
2014165438+129 October, Iptek participated in the symposium of Shanghai Ruihe Enterprise Group to interpret the Russian market.
2014165438+1October 26th, Epik and Ethiopian Deputy Prime Minister Demek met at the Shanghai Africa Center.
20 14 1 1.5, Iptek obtained utility model patents: crusher oil tank structure, crushing cone structure and bowl-shaped bearing frame pin structure.
On October 2014165438+10, the new Iptek workshop was put into use.
20 14 10, Iptek |EPTEC|EP-tec welcomes the Angolan delegation from Africa to visit the company.
2065438+September 2004, Iptek |EPTEC|EP-tec production 1000 cubic meter sandstone production line was sent to Guizhou.
From 2065438 to September 2004, several sand and gravel production lines with an annual output of 1000 cubic meters entered the Hubei market.
2065438+In August, 2004, Iptec |EPTEC|EP-tec helped customers set up sand and gravel production lines.
July 20 14, Iptek |EPTEC|EP-tec "Crusher travels thousands of miles in quality" entered Wenzhou.
From June 2065438 to June 2004, several pieces of crushing production line equipment with annual output of 1000 cubic meters were sent to Hubei.
2065438+In May 2004, several production lines of Iptek |EPTEC|EP-tec 1000 cubic stone/hour entered the Jiangsu market. 20 13 June, Iptek EP-TEC and its cooperative enterprises * * * participated in the construction machinery and equipment exhibition CTT20 13 held in Moscow, Russia.
On may 20 13, Iptek (Shanghai) completed the ISO900 1:2008 certification.
20 13 entered the Chilean market in April and exported several sets of crushing and screening production lines.
20 13, 13 In June, Iptek Machinery & Equipment (Shanghai) Co., Ltd. was established to undertake the market development of the group's products, carry out economic and technical cooperation, consult on sand and gravel production, and contract external installation projects. 20 12165438+1October 27th, I went to BMW China 2012 with a new PEW hydraulic jaw crusher, a hydraulic cone crusher and a new sand making machine.
2012165438+10 rebuilt the office building of the company headquarters.
September 20 12, PCKW reversible hammer crusher and PF compound cone crusher participated in the exhibition of construction machinery, construction machinery and construction vehicle equipment in Inner Mongolia, China.
In July, 2065438+02, he participated in Vietnam Construction Machinery Exhibition.
On may 20 12, he was selected as a member of the washing equipment branch of China heavy machinery industry association. 201110 iptek group company participated in Beijing BICES construction machinery exhibition.
20111kloc-0/1iptek group company participated in 1 10 canton fair.
On may 20 1 1 year, the utility model patent was obtained: efficient fine crusher;
20 1 1 The first cement production line was exported to Yemen in April. 20 1010 take part in BMW China 2010 with large jaw crusher and cone crusher.
- Previous article:Where is Wuliangsuhai?
- Next article:Many parents like to travel with their children. Can travel replace family education?
- Related articles
- Where can I use tourist vouchers in Kunming?
- Nanning Yongjiang Night Tour Opening Hours+Route+Ticket Price
- Who are the competitors of rural tourism?
- Is the elderly care residence service reliable?
- Recommendation of local minority tourist attractions with few domestic tourists on May 1 ST
- Tourism Prospect of Shandong Province Which city in Shandong Province has a good tourism?
- How to take a bus to Yunmeng Mountain in Xingtai?
- What countries are there in South America and North America?
- Introduction of Nanchang Jiulong Lake Wanda Cultural Tourism City
- Who is Zhang Yima?