Traditional Culture Encyclopedia - Travel guide - How to cut out pictures in adobe photoshop

How to cut out pictures in adobe photoshop

There are many ways to cut out pictures:

1. Cut out pictures with eraser

1. Open the picture;

2. Double-click For this layer, change the background layer to a normal layer

3. Select the eraser tool, select a larger main diameter of the brush, and roughly erase most of the unused parts

4. Select the smaller main diameter of the brush and enlarge the picture for fine processing

2. Magic wand cutout

1. Open the picture;

2 , double-click the layer and change the background layer to a normal layer;

3. Select the magic wand tool and select an appropriate tolerance value in its property bar (if the color difference is small, a smaller value must be selected, the general value is is 20); if the color difference of the image is large, select a larger value of 80;

4. Click on the background;

5. Edit/Clear

< p>3. Path cutout

1. Open the picture;

2. Double-click the layer and change the background layer to a normal layer;

3. Select the pen tool and select parameters in its property bar;

4. Circle the part of the picture you want to use;

5. The end point connects to the point to form a closed area;

6. Click the Load path as selection button under the path panel;

7. Select/invert selection.

4. Mask cutout

< p>1. Open the picture;

2. Double-click the layer and change the background layer to a normal layer;

3. Select the magic wand tool and select a larger tolerance (50 —80), hold down the Shift key and select all objects by clicking multiple times;

4. Press the Add Mask tool button;

5. In the navigation Increase the display ratio in the browser panel and highlight the part to be modified;

6. Select the background color as black and the foreground color as white;

7. Select the brush tool with a diameter of 10 Left and right, add a mask area to the part to be modified;

8. Reduce the brush diameter to a smaller point (5-7), convert the foreground and background colors, make the foreground color black, and remove the added excess parts. Lose;

9. If it is not ideal, repeat steps 7 and 8 to achieve satisfactory results.

5. Channel Cutout

1. Open the picture;

2. Double-click the layer and change the background layer to a normal layer;

3. Open the channel panel and click on the three monochrome panels of red, yellow, and blue respectively to find the channel with the clearest object. In this picture, we click on the blue channel;

4. Drag the blue channel to the Create New Channel button below the channel panel to copy the blue copy channel;

5. Image/Adjustment/Levels, adjust the "Input Levels" to enhance the contrast of the object;

p>

6. Image/Adjustment/Invert;

7. Use the lasso tool to circle fireworks and other patterns;

8. Select/Invert selection, Edit/ Fill/fill the foreground color (white), select/deselect;

9. Image/Adjustment/Invert;

10. Hold down the "Ctrl" key and click on the blue copy channel, Load the selection of fireworks, etc., switch to the layer panel, and the fireworks, etc. are selected;

11. Select/invert selection, edit/clear; select/deselect

More professional There are many other techniques, such as filter cutout, extracting the foreground color, setting it to white and then using an eraser to insert the excess color...Using enhanced contrast, sensitivity, etc. to extract hair, hair, etc... and there are many, many more... ...However, these methods are difficult to describe, so some space is omitted.

In many tourist attractions, landscape photos can be quickly synthesized to commemorate, that is, portraits are superimposed on fixed landscape pictures, but the resulting photos are relatively rigid. The Photoshop darkroom makes it easy for us to create a variety of composite photos, and thanks to the powerful functions of Photoshop, it can be completely fake and real, allowing you to "travel around the world" without leaving home.

The prerequisite for success in making this type of composite photo is perfect cutout. The composite object must be perfectly separated from the original background, and then the powerful filter function of Photoshop can be used to create some light and shadow effects. .