How to drive the downhill car?

Slow down before going downhill and let the vehicle enter the downhill at a low speed. Shift to the right gear before going downhill. Usually, you should choose second or third gear. It is forbidden to shift gears after entering the downhill section. It is forbidden to slide in neutral on downhill sections. It is necessary to shift to the appropriate gear and reduce the sliding speed of the vehicle through the restriction of the engine. 2 brake carefully when going downhill, and brake carefully when going downhill. Test whether the braking performance is good before going downhill. If there is any fault, go down the mountain after troubleshooting. In the downhill process, the brakes can be used intermittently to effectively control the sliding speed of the vehicle. Try to avoid emergency braking. When emergency braking is needed, braking can only be carried out under the condition that the vehicle keeps a straight forward trend. The steering wheel should be light when going downhill. The steering wheel should be light when going downhill, and you should not slam the steering wheel to prevent it from overturning due to large inertia, high speed and improper use. The distance between vehicles should be kept above 50 meters. If the slope is too long, the inertia force of each vehicle is large, and the workshop spacing should be appropriately increased. If you go downhill first, then go uphill, when approaching the bottom of the slope, you should be prepared to rush to the slope, release the brake pedal in time, and shift to a high gear in time.