How to turn on the cooling of Ford New Focus air conditioner without cooling?

Instructions for use of the new Ford Focus Air Tune

Fan speed control: lower or higher the air flow in the car.

B/C: Press the button to turn the blank tone on or off. You can use air to cool the car. When the weather is hot, in order to shorten the time to reach the comfortable temperature, you can keep the window open until you feel the cold air blowing from the air outlet.

Air distribution control: Press these buttons to turn on and off the airflow in the windshield, dashboard and foot area vents. You can distribute airflow through any combination of these vents.

D. Rear windshield heating: Press the button to turn on or off rear windshield heating.

E. Empty air circulation: Press the button to switch between external air circulation and internal air circulation. Air circulates in the passenger compartment, which can reduce the cooling time in the car and reduce the odor from the outside to the inside.

F temperature control: control the temperature of the circulating air in the car.

G. Defrosting: Turn the temperature control knob to start defrosting, at which time air flows out from the windshield outlet. You can also use this setting to defrost or remove the thin ice on the windshield.

Maximum air conditioning: Turn the temperature control knob to the coldest position. Empty internal air circulates through the ventilation hole of the instrument panel, and the empty switch will automatically open.

I: Press the button to turn the system on or off.

Automatic: Press the button to select the automatic mode. Adjust to the temperature you want. The system will automatically adjust the wind speed, air distribution, air conditioning operation and air circulation inside/outside the vehicle to heat or cool the vehicle, thus maintaining the selected temperature. You can also turn off dual-zone mode by holding down the button for more than 2 seconds.

B fan speed control: reduce or improve the airflow in the car.

Air distribution control: Press these buttons to turn on and off the airflow in the windshield, dashboard and foot area vents. You can distribute airflow through any combination of these vents.

Empty control display: This display shows the set temperature and fan speed.

E rear windshield heating: press the button to turn on or off rear windshield heating.

F/c: press the button to turn the zero tone on or off. You can use air to cool the car. When the weather is hot, in order to shorten the time to reach the comfortable temperature, you can keep the window open until you feel the cold air blowing from the air outlet.

G. In-vehicle air circulation: Press the button to switch between external air circulation and internal air circulation. Choosing the internal circulation mode can reduce the cooling time inside the car and the odor outside the car entering the car. Maximum air conditioning: press the button to turn on the full cooling mode. Circulating air flows out from the air outlet of the instrument panel, the air switch is automatically turned on, and the fan is automatically adjusted to the highest speed.

Maximum frost: press the button to turn on the maximum frost. Air flows through the windshield outlet, the air switch is automatically turned on, and the fan is automatically adjusted to the highest speed. You can also use this setting to defrost or remove the thin ice on the windshield. When the maximum defrosting mode is selected, the rear windshield heating will automatically turn on.

J: Press the button to turn the system on or off.

@20 19