How many kilometers is it from Huaiji to Shi Ping, and how to get there by bus?

The following routes are for reference only, please pay attention to the weather forecast and the road construction and travel tips of the transportation department before going out.

Long-distance driving needs to check vehicle safety in advance, pay attention to driving safety and arrange rest reasonably. Don't overspeed and drink and drive.

I hope you have a good trip. The detailed driving route is as follows:

Driving route: the whole journey is about 267. 1 km.

Starting point: Huaiji County

1. Driving plan of Huaiji County

1) Go north from the starting point, drive along Jiefang Middle Road for 2 10 meters, and turn right into Yegong Avenue.

2. Drive along Yegong Avenue for 960m and go straight to S349.

3. Drive along S349 for 25.4 kilometers, turn right slightly and enter S262.

4. Drive along S262 for 78.0km, after passing Laobu Village for about 100m, turn right slightly and enter S262.

5. Drive along S2621.4km, turn right and enter S26 1.

6. Follow S26 1 drive 12.0 km and turn left on the ramp.

7. Drive along the ramp 180m, turn right slightly in the direction of Liannan/Chenzhou and get on the ramp.

8. Drive along the ramp for 300 meters. At the entrance, enter Qinglian Expressway.

9. Drive along Qinglian Expressway for 75.3 kilometers, and enter Yilian Expressway at the exit.

10. Drive along Yilian Expressway for 49.4 kilometers, turn right slightly towards Zhuhai/Guangzhou and get on the ramp.

1 1. Drive along the ramp for 840 meters and enter the Beijing-Hong Kong-Macao Expressway at the entrance.

12. Shaoguan driving plan

1) Drive along Beijing-Hong Kong-Macau Expressway 18.2km, and get off at Shi Ping/Lechang /S249 exit.

2) Drive along the ramp 1. 1km, turn right and enter S249.

3) Drive along S249 1 10 meters, turn left slightly and enter Huangni 'ao Road.

4) Drive along Huangni 'ao Road for 670 meters and turn left into Hexi Avenue.

5) Drive along the West Avenue along the river130m, pass the left Pearl Electric Appliance for about 70m, and go straight to the bridge.

6) Drive along the bridge for 350 meters, turn right ahead and enter S248.

7) Drive along S248 for 2.0km, turn right ahead and enter Jinji South Road.

8) Drive 200 meters along Jinji South Road, pass the store of Shiping New Age Midea on the left for about 170 meters, and then turn left slightly into Qunzhong Road.

9) Drive along Qunzhong Road for 100 meters, pass New Age Electric Appliance Company on the left for about 130 meters, and reach the destination (on the left side of the road).

End point: Shiping Town