How to adjust the temperature in Volkswagen sagitar weather

Pacific car network 1, temperature adjustment, the temperature of the left and right parts of the car can be adjusted separately. Turn the regulator to adjust the corresponding temperature. The temperature is displayed on the outer ring. 2, blower speed adjustment, the system automatically adjusts the blower speed, you can also manually adjust the blower speed, the brighter the light, the greater the air volume. 3, airflow distribution, the system automatically controls the airflow direction. You can also manually switch the air flow direction by adjusting the air outlet direction button.

Where is the Volkswagen sagitar thermometer? How to adjust sagitar thermometer? Volkswagen sagitar thermometer is in the lower area of the dashboard tachometer. In order to ensure that the engine works in the normal temperature range, the automobile will be equipped with an engine coolant temperature sensor, and if the antifreeze temperature is too high, an alarm will appear. Generally speaking, the engine water thermometer is displayed by physical or virtual dial hands, while a few vehicles have no instrument panel and only display warning signs when the temperature is too high.

The engine coolant temperature is not as low as possible, nor is it as high as possible. Need to be within a certain range, the normal temperature is 90℃ at the center of the pointer. After the vehicle is started, the temperature of antifreeze rises rapidly. After the pointer reaches the central position, the temperature of the heat exchange equilibrium antifreeze no longer rises. Generally speaking, the vehicle starts best when the temperature reaches the middle position, which is one of the reasons why the vehicle should be warmed up before starting.

The engine coolant temperature is not as low as possible, nor is it as high as possible. Need to be within a certain range, the normal temperature is 90℃ at the center of the pointer. After the vehicle is started, the temperature of antifreeze rises rapidly. After the pointer reaches the central position, the temperature of the heat exchange equilibrium antifreeze no longer rises. Generally speaking, the vehicle starts best when the temperature reaches the middle position, which is one of the reasons why the vehicle should be warmed up before starting.

How can I see sagitar without a thermometer? What if sagitar doesn't have a thermometer? You can install your own water thermometer without it. First of all, it is best for the owner to find the water pipe of the car first, which is generally obvious and easy for the owner to see. Then, cut it at a suitable position, and the length should be close to the length of the tee. In this way, the tee can be installed in the water supply pipe and fixed with a lock, and at the same time, the sensing head can be screwed on the small opening. Finally, this step can be completed by applying sealant to the gap.

Then, the car mainly connects the lead of the thermometer to the engine compartment and the sensor from the left side of the driver's seat, and at the same time connects the lead of the thermometer to the lead in the middle of the cigarette lighter and the other two leads respectively, so that a loop can be formed with it, and the owner can automatically cut off the power supply after pulling out the key, which is very convenient.

At this point, the installation of the automobile water thermometer has been completed, but the automobile mainly observes the working state of the machinery at any time in the early stage after installing the automobile water thermometer. If the temperature reaches about 99 degrees, the owner will quickly turn off the fire, open the cover and rest for a while, waiting for a buffer time.