How to turn on Iveco warm air

1, start the vehicle with the vehicle key first.

2. After starting the vehicle, wait for the water temperature of the vehicle to rise, because the warm air is heated by the vehicle drying system.

3. Press the car air conditioner switch, turn off the A/C button, and set it to internal circulation.

4. Turn the car air conditioner to the red area, and warm air will be blown out.

Extended data:

The AC key is the switch of the air conditioner compressor. To use air conditioning in summer, you must turn on the AC button, that is, turn on the air conditioning; The warm air only uses the thermal cycle in the car, and there is no need to start the air conditioning compressor at all. So you just need to adjust the air conditioning button, and you can turn on the heater without turning on the AC switch.

In the cold season, we need to raise the temperature inside the car quickly. When the car starts, the engine starts to warm up. After the engine temperature indicator reaches the middle position, first turn on the warm air conditioner, and set the air circulation to external circulation, so that the cold air in the car can be discharged outside the car. After waiting for 2 to 3 minutes, set the air circulation to internal circulation.

When it comes to rain and snow and the temperature difference between the inside and outside of the car is relatively large, the front windshield is prone to fog. At this time, we only need to adjust the direction of the warm air to the position where it blows to the front windshield, and the fog can be removed in a few minutes.

People's Daily Online-Will heating the car in winter really increase fuel consumption?