What are the contents of enterprise environmental inspection?

Mainly check the EIA procedures of enterprises. If the EIA document is a statement or report, check the EIA document and the reply; If the EIA document is a registration form, check the environmental impact registration form and the filing receipt. Check the implementation of environmental protection acceptance after the completion of the project (including information disclosure) and the implementation of the sewage permit system (mainly including whether the units that should handle the sewage permit discharge with certificates, whether they have carried out self-monitoring and record account declaration after issuing the certificate, and whether the units that should register sewage discharge have registered sewage discharge, etc.). ).

The forms of law enforcement inspection of ecological environment are generally divided into routine inspection and surprise inspection. The inspection methods mainly include visiting the masses, listening to reports, checking information and watching on the spot.

First, interview the masses

Letters and complaints from the masses are an important source of information to explore environmental problems and provide the best clues for environmental monitors to crack down on environmental violations. By visiting the people around polluting enterprises, environmental monitoring personnel can understand the daily sewage discharge of enterprises and even steal clues.

Second, listen to the report

Mainly listen to the brief introduction of enterprise management personnel on the production and operation, the performance of environmental protection procedures, the construction of pollution prevention facilities and the implementation of pollution prevention measures.

Third, check the information.

Mainly check the EIA procedures of enterprises. If the EIA document is a statement or report, check the EIA document and the reply; If the EIA document is a registration form, check the environmental impact registration form and the filing receipt. Check the implementation of environmental protection acceptance after the completion of the project (including information disclosure) and the implementation of the sewage permit system (mainly including whether the units that should handle the sewage permit discharge with certificates, whether they have carried out self-monitoring and record account declaration after issuing the certificate, and whether the units that should register sewage discharge have registered sewage discharge, etc.). ). Check the operation and management ledger of pollution control facilities. If solid waste is involved, it will also check the utilization or disposal of solid waste and check the account information such as relevant contracts and transfer procedures.

Fourth, look at the scene.

Mainly check whether the production raw materials, production processes and products, production capacity, pollution prevention facilities and measures of the enterprise are consistent with the EIA and approval documents. If there is any inconsistency, verify whether it is a major change. If it is a major change, it needs to be re-submitted for EIA, and the general change needs to be made clear in the independent acceptance of the project. Check the implementation of rain and sewage separation, the collection and treatment of waste water and waste gas with different quality, and the management of production site (mainly to verify whether the production workshop is clean and orderly, whether there is leakage, unorganized waste gas collection and treatment, etc.). ).

Check whether the pollution prevention and control facilities such as waste water and waste gas operate normally, and whether the key parameters, dosing, consumables replacement and maintenance records of the treatment facilities are complete and reasonable, and can conduct on-site sampling and testing of waste water or waste gas. If there is a central control system for pollution control facilities, relevant historical records and operation curves will also be consulted. Check whether the sewage outlet of waste water and waste gas is standardized, whether signs are set, whether the position of the sewage outlet of waste water meets the requirements, whether the sampling points are set in accordance with the relevant regulations, and whether the standardized flow measuring section is set to facilitate the measurement of flow and velocity; Whether the number and height of exhaust pipes meet the relevant requirements, and whether the settings of sampling holes, monitoring platforms and safe passages are standardized. Whether to install an online monitoring system for pollution sources (not all pollutant discharge units need to install it, key pollutant discharge units are included in the key management of pollutant discharge permits, and there are clear requirements for the approval of environmental impact assessment or other existing environmental management systems), and whether the monitoring instruments operate normally.

Check whether the accident wastewater collection pool is set as required. In case of accident, sewage can flow into the accident wastewater collection pool by itself, and should not be set on the ground, but should be vacant at ordinary times. Whether the storage place of solid waste is set up according to relevant specifications, whether measures are taken to prevent scattering, loss, leakage or other environmental pollution, and whether warning signs and identification signs are set up. When environmental monitoring personnel conduct on-site inspection, at least two law enforcement officers first show their law enforcement certificates, identify themselves and explain their purposes. Enterprises need not be nervous, just do a good job of cooperation and inspection. Even if illegal problems are found, they need to actively cooperate. Never refuse or hinder the on-site inspection of law enforcement personnel by delaying or containing, otherwise the consequences will be very serious. As long as enterprises do a good job in ecological environment management, standardize the operation of pollution prevention facilities, make relevant records and ledgers, and meet the discharge standards, there is no need to worry about on-site inspection by environmental monitoring personnel.