It's too humid today. What if the camera is blurred?

Generally, it is caused by fog on the surface of camera lens when entering and leaving the environment with large temperature difference. It will fade in about ten minutes.

If it is determined that there is water vapor in the lens or camera, it needs to be dried in a drying oven immediately, and the imaging effect should be checked at least 72 hours after the humidity is lower than 55%.

Warning! If it is determined that there is water vapor inside the lens and fuselage, it must be dealt with as soon as possible, otherwise it will lead to irreversible property losses. The water vapor inside the lens may completely destroy the lens. The water vapor on the pentaprism or mirror may cause mildew and cause permanent damage to the imaging. Water vapor on CMOS may cause spots or complete electrical failure.