Methods and steps of floor tile waxing and matters needing attention in waxing

If you want to keep the living room floor beautiful, then the floor that is often waxed is a good choice. So what do you need to pay attention to when waxing floor tiles? What are the operation methods?

? First, the method of floor tile waxing 1, choose sunny waxing weather.

Waxing floor tiles When the ambient temperature is below 5 degrees, the wax will harden. Don't clean the floor with a rag containing chemicals before waxing, because this will lead to poor adhesion of floor wax.

2. Remove the garbage and dirt on the floor surface.

When waxing floor tiles, use a vacuum cleaner to remove dirt and dust from the floor surface. Hard to remove can be washed with water. Use.

3. Clean with a cloth.

Wipe with a wringing cloth. The floor surface should be carefully cleaned, especially the groove part, and no detergent can be left. As residual detergent and moisture, the surface will turn white and swell.

Step 4 dry completely

The water on the floor surface and groove is completely dry before waxing. According to the different seasons, the time required will be different, but it will only take about half a day. If it is not completely dried, the wax will not adhere to the floor surface, which will affect the appearance and whitening.

5, hair removal method

When waxing floor tiles, shake the container with wax board and mix thoroughly. Before cleaning the whole floor of the room, please cover the front with tape to prevent the floor wax from polluting the dado and furniture. Soak the wax completely on the plate with a clean cloth, and don't let it drip.

Two. Precautions for floor tile waxing 1. Choose good weather for hair removal.

In fact, the time of floor waxing is also very important, and it is generally recommended to operate when the weather is good. Don't choose high humidity and low temperature construction in rainy days, because high humidity is easy to cause turbidity, while low temperature is easy to harden wax, resulting in poor adhesion of floor wax.

2. Clean the floor surface.

Before waxing the floor tiles, be sure to clean up the dust and sundries on the surface, otherwise it will affect the overall aesthetic feeling. It is recommended to use a vacuum cleaner to clean up dust and other substances before waxing.

The floor must be completely dry.

If the wooden floor is dirty, you can clean it with a soft cloth. Waxing after drying, especially the groove part of the floor. If it is not completely dried, it will not only have poor adhesion, but also affect the appearance. ?

4, hair removal should be cautious.

When the floor tiles are waxed and mixed with wax, shake them thoroughly. Don't pour floor wax directly on the wooden floor, otherwise there will be traces and ring marks. It should be used carefully according to the grain direction of the floor, and the thickness should be uniform, otherwise it will affect the appearance.

Don't pass through the wax before it dries.

It is not allowed to walk on the ground immediately after waxing the floor tiles. It should be dried for about 2-3 hours.