How to turn on the switch of Santa Fe fuel tank cover if it is broken?

Santa Fe tank cover switch is broken, and the opening method is as follows:

1. The fuel tank cover is stuck or rusted. Just pry or pat lightly and press hard at the same time to open the fuel tank cover.

2. The fuel tank cap bounces up and locks up by the motor, and the fuel tank cap cannot be opened due to motor failure. There is no way to replace the motor at the first time, but if it is urgent to open the fuel tank cover, you can use the emergency switch.

3. The spring of the fuel tank cover loses elasticity. A small spring is installed at the rubber pad extending out of the oil tank to increase the elasticity between the oil tank cover and the locking device, which can solve the problem that the oil tank cover does not bounce off.

The failure to open the fuel tank cover is caused by icing. You can choose the corresponding methods according to the situation, such as pouring hot water, electric hair dryer heating and so on. After the lid is opened, remember to clean the lid often. Generally, there are drainage holes under the water tank cover. If this drain is blocked, there will be water in the water tank cover, which is easy to freeze and cannot be opened in cold weather.

5. The fuel tank cover is controlled by the central door lock system, and the central door lock fails to bounce off.