90 square meters decoration budget

A: 8: {I: 0; a:6:{ s:6:" m title "； Student 3:33: "

190m2 decoration budget list

"; S:7: "summary"; s:3 172:"

Generally, the cost of simple decoration is 30,000-50,000, the cost of intermediate decoration is 50,000-80,000, and the cost of high-grade decoration is 8-120,000. /kloc-more than 0/20,000 belongs to luxury decoration.

I. Living room and dining room

1, base treatment of wall top surface, about 16 yuan /m2.

2. Brush latex paint on the top surface of the wall, 6 yuan /m2 or so.

3. Plastering line installation and painting, 9 yuan /m2 or so.

4. Window sill, about 240 yuan/m2.

5. Ceiling modeling, about 120 yuan/m2.

6. TV wall modeling, about 80 yuan/square meter.

7, the living room floor tile shop is stuck, 40 yuan/square meters.

8. The production of reflective lamp trough of downlight is about 1 10 yuan/m2.

9. Wood painting, about 700 yuan/square meter.

Second, the bedroom part.

1, base treatment of wall top surface, about 16 yuan /m2.

2. Brush latex paint on the top surface of the wall, 6 yuan/square meter or so.

3. Push-pull threshold, about 170 yuan /m2.

4. Window sill, about 120 yuan/m2.

Third, the kitchen part.

1, plastic-steel gusset ceiling, about 100 yuan/square meter.

2. Threshold stone, about 160 yuan /m2.

3. Wall renovation, around 220 yuan.

4. Floor tile paving, 42 yuan/square meter.

5, wall brick paving, 42 yuan/square meters.

Fourth, the bathroom part.

1, plastic-steel gusset ceiling, about 1 10 yuan/m2.

2. Threshold stone, about 130 yuan/m2.

3. Floor drain installation, around 30 yuan/set.

4. Floor tile paving, 42 yuan/square meter.

5, wall brick paving, 42 yuan/square meters.

6, waterproof, 40 yuan/square meters.

Verb (abbreviation for verb) balcony part

1, balcony putty latex paint, 22 yuan /m2 or so.

2. Tile the balcony, about 50 yuan/square meter.

3. Marble window sill, 240 yuan/square meter or so.

Six, water and electricity and other parts

1. Waterway: PPR 4 pipe 42 yuan/meter, PPR 6 pipe 52 yuan/meter, including fittings but excluding faucet. The water meter is changed to 150 yuan/set, and the part of waterway less than one meter is calculated as one meter.

2. Circuits: including laying of wires, network cables and telephone lines. 35 yuan/m for concrete concealed line, 25 yuan/m for wall-built concealed line, 20 yuan/m for open line, Kloc-0/5 yuan for concrete wall box and Kloc-0/0 yuan for wall-built box.

3, switch socket: according to the actual settlement.

4. Material transportation and handling fees: around 400 yuan.

5. Garbage removal: around 200 yuan.

6. Other hardware, nails, tapes, etc. : Around 400 yuan.

Seven, the main material part

1, wooden floor, about 150 yuan/m2.

2, wooden door, about 1 100 yuan/fan.

3. Door cover, 90 yuan/m or so.

4, sliding door, according to the actual settlement.

5, cabinets, according to the actual settlement.

6. Floor tile, 60 yuan/square meter.

7. Wall tiles, about 50 yuan /m2.

8, custom wardrobe, according to the actual settlement.

9. Bathrooms and bathrooms shall be settled according to actual conditions.

"; s:8:“art _ link”； s:0:“”； s:8:“ordernum”； I:0； s:6:“imgurl”； s:0:“”； S:8: "file name"; s:0:“”； } I: 1； a:6:{ s:6:" m title "； 39 points for students: "

Matters needing attention in the decoration budget of 2 90 square meters

"; S:7: "summary"; s:8 16:"

First, usually the owner may not know the specific cost of each ornament and item, so he can't handle the amount. At this time, the owners should know more, go shopping on the spot, consult more designers, read more books and magazines, and inquire about the characteristics and prices of decoration materials.

Second, the 90-square-meter house decoration budget is not fixed. In the process of decoration, there will always be over-decoration, and the owner should make a reasonable over-expenditure budget before decoration. It is suggested that the owner calculate the highest price he can bear in advance, and then subtract 10% ~ 20% from this price as extra flexibility, and the rest is the upper limit of the preliminary budget.

Third, don't be greedy for petty gain. In order to save money, many owners may ask unlicensed construction teams to carry out decoration, which leads to problems such as shoddy decoration materials, delayed construction period and poor decoration quality.

"; s:8:“art _ link”； s:0:“”； s:8:“ordernum”； I: 1； s:6:“imgurl”； s:0:“”； S:8: "file name"; s:0:“”； } I:2； a:6:{ s:6:" m title "； Health: 27: "

Three Disadvantages of Whole House Customization

"; S:7: "summary"; s:846:"

(1) Not many enterprises can choose whole house customization. Whole house customization is a brand-new concept, which has not been fully popularized in China, and the decoration companies that can customize the whole house are also very limited. Generally, only some powerful enterprises can do it. Every step of the whole house customization construction process needs to be accurately grasped, and the requirements for decoration companies are extremely high, so most domestic enterprises do not have this service project at present.

(2) expensive. It takes a lot of time to customize the whole house, and it also requires professional designers, professional construction workers and professional managers to connect with the owners in depth to realize their personalized decoration needs. In this process, the decoration company has invested a lot of manpower and material resources, so the fees charged are relatively high. In the market, the cost of customizing cabinets needs tens of thousands of yuan, not to mention the whole house customization, which may cost hundreds of thousands.

"; s:8:“art _ link”； s:0:“”； s:8:“ordernum”； I:2； s:6:“imgurl”； s:0:“”； S:8: "file name"; s:0:“”； } I:3； a:6:{ s:6:" m title "； Student 24: "

4 quanwu custom made furniture

"; S:7: "summary"; s:668:"

At present, in China, there are not many pieces customized for the whole house, but the furniture customized for the whole house is still popular, and many consumers still trust it. The custom-made furniture of the whole house is integrated with the overall home style, and the manufacturer arranges special personnel to carry out on-site measurement, which has high accuracy and makes furniture products according to the results. Among them, the common custom furniture in the whole house is wardrobe, which is mostly placed in the bedroom, and personal clothes need to be placed inside, so consumers have higher requirements for the quality of products. Moreover, the current wardrobe market is chaotic, and synthetic artificial products are used instead of solid wood products. Consumers are often deceived, so they are more willing to spend more money to make customized wardrobe products with higher safety performance and aesthetic value.

"; s:8:“art _ link”； s:0:“”； s:8:“ordernum”； I:3； s:6:“imgurl”； s:0:“”； S:8: "file name"; s:0:“”； } I:4； a:6:{ s:6:" m title "； Student 3:33: "

5 modern living room lamps purchase points

"; S:7: "summary"; s: 13 12:"

First, from the perspective of safety performance, don't buy too cheap lamps, which may have quality problems. Pay attention to check whether the certificate and warranty of lamps are complete when purchasing, and try to choose brand products with quality assurance.

Second, don't buy lamps with exposed light source, which is easy to produce glare and cause harm to people's eyes.

Third, when choosing lamps, we should pay attention to the shape, color and style of lamps, which must be consistent with the overall decoration style and color of the living room, and the size of lamps should also conform to the actual situation of the living room space.

Fourthly, the modeling structure of lamps should be as simple as possible, not too complicated, so as to facilitate handling and cleaning in the future.

Fifth, lamps and lanterns are mostly glass products, which are fragile. Pay attention to check whether there are scratches or damage when buying.

Sixth, you can do your homework before buying lamps to understand the latest development trend of lamps, so as not to buy outdated lamps.

Seventh, it is recommended to buy lamps with energy-saving light sources.

"; s:8:“art _ link”； s:0:“”； s:8:“ordernum”； I:4； s:6:“imgurl”； s:0:“”； S:8: "file name"; s:0:“”； } I:5； a:6:{ s:6:" m title "； s:3 1:"

6 Modern living room lighting renderings

"; S:7: "summary"; s: 1039:"

"; s:8:“art _ link”； s:0:“”； s:8:“ordernum”； I:5； s:6:“imgurl”； s:0:“”； S:8: "file name"; s:0:“”； } I:6； a:6:{ s:6:" m title "； Health: 27: "

7 glass sliding door installation

"; S:7: "summary"; s:2994:“

1, the hanging sliding door is difficult to handle because the rail box is installed first and then the brick is attached, which brings certain difficulties to the construction. Because the track bears a certain pressure, so do the bricks. Over time, it is easy to cause the bricks next to the track to crack. In addition, if in the kitchen, bathroom and other spaces, the track box is easy to shelter evil people from evil practices, and oil smoke and dust will fall on it, which will bring trouble to cleaning.

2. The track box on the upper part of the sliding door should be 12 cm high and 9 cm wide. Like the curtain box, the track box is equipped with a track, and the sliding door can be hung on the track. At present, the height of most doors or doorways is 1.95 to 2.15m. Experience shows that when the height of the door is lower than 1.95m, people will feel depressed and uncomfortable regardless of their height. Therefore, when making a sliding door, the height should be at least 195+ 12=207 cm, and there is enough space to make a track box before considering making a sliding door. Otherwise, it can only be externally hung, that is, the track box is exposed, which is definitely not good-looking, and the gap between Nagato and the wall will also become larger as time goes by.

3. The width of the sliding door is exquisite. The gold size of a normal door is about 80 cm× 200 cm. In this structure, the door is relatively stable. If the height is higher than 200 cm or even higher, it is best to reduce the width of the door or make more sliding doors on the premise of keeping the area unchanged to maintain the stability and safety of the door.

4. Carefully use the sliding door from the floor to the top (open the hanging rail box). Because the swing amplitude is too large when pushing and pulling, the sliding door is easy to deform after a long time, and the deformed back door cannot be opened, which means that it cannot be maintained and used.

5. Because the sliding door is in contact with both sides of the wall or cabinet, there should be no other object blocking the closing of the sliding door at the contact position. For example, the position of the drawer in the cabinet should avoid the intersection of sliding doors, at least higher than the bottom plate1cm; The drawer on the folding door cabinet is at least 15cm away from the side wall. Pay special attention to the power switch and socket on the wall here. If the sliding door is blocked, the position of the switch and socket should be changed.

6. No matter what material you make, make sure the floor is flat, and the four walls at the door should be horizontal and vertical. Otherwise, the installation rear door will be skewed. The adjustable error shall not exceed 65438 00 mm.

7. Please don't install the corner line in the installation position. The plaster line can be installed on the sealing plate above the closet. If the door is directly above, don't install plaster line.

8. Carpets with a thickness less than 5 mm will be cut off and directly attached to the lower rail. Carpets with a thickness of more than 5 mm can be directly fixed on the carpet with screws if double tracks are installed; If the monorail is installed, the carpet at this position must be cut off, and 3-5 mm thick wooden strips should be put in the carpet in advance, so that the monorail can be directly attached to it.

9. At the junction of wooden floor and ceramic tile, this situation mostly occurs between balcony and living room, and between bedroom and living room. The solution is as follows: 1. Try to install the lower guide rail on the material. 2. Add wood or marble with the same width as the lower rail between the two materials. Threshold stones can also be used in the kitchen.

"; s:8:“art _ link”； s:0:“”； s:8:“ordernum”； I:6； s:6:“imgurl”； s:0:“”； S:8: "file name"; s:0:“”； } I:7； a:6:{ s:6:" m title "； Health: 27: "

8 glass sliding door parts

"; S:7: "summary"; s: 13 100:"

Before making glass sliding door accessories, we need to prepare a lot of materials. Without enough materials, we can hardly do a good job in glass sliding door. Generally, materials such as slide rails, handles, wooden frames and glass glue need to be prepared to make glass sliding door. Because glass is used, glass glue is an essential material, and other materials such as slide rails and handles should also be prepared.

Reprint the original address:/view/view/n16238.html.

Reprint the original address:/view/view/n5417.html.

Reprint the original address:/view/view/n1204.html.

Reprint the original address:/view/n37.html.

Reprint the original address:/view/N21831.html.

Reprint the original address:/view/n2875.html.

Reprint the original address:/view/n16177.html.

Reprint the original address:/view/n20922.html.

Reprint the original address:/view/view/n1603.html.

Reprint the original address:/view/n6605.html.

Reprint the original address:/view/N21416.html.

Reprint the original address:/view/n4984.html.

Reprint the original address:/view/n6479.html.

Reprint the original address:/view/view/n18476.html.

Reprint the original address:/view/view/n1450.html.

Reprint the original address:/view/view/n18229.html.

Reprint the original address:/view/n6790.html.

Reprint the original address: /view /view/n7 1.html.

Reprint the original address:/view/n2595.html.

Reprint the original address:/view/n4328.html.

Reprint the original address:/view/view/n20931.html.

Reprint the original address:/view/n5953.html.

Reprint the original address:/view/view/n22317.html.

Reprint the original address:/view/n3083.html.

Reprint the original address:/view/view/n19286.html.

Reprint the original address:/view/n1415.html.

Reprint the original address:/view/view/N21035.html.

Reprint the original address:/view/view/n16545.html.

Reprint the original address:/view/view/N21868.html.

Reprint the original address: /view /view/n238 1.html.

Reprint the original address:/view/view/N21384.html.

Reprint the original address: /view /view/n205 1.html.

Reprint the original address:/view/n3028.html.

Reprint the original address:/view/n3684.html.

Reprint the original address:/view/n18189.html.

Reprint the original address:/view/view/N21852.html.

Reprint the original address:/view/n20289.html.

Reprint the original address:/view/n3467.html.

Reprint the original address:/view/n5925.html.

Reprint the original address:/view/view/N21450.html.

Reprint the original address:/view/N21197.html.

Reprint the original address:/view/n19481.html.

Reprint the original address:/view/N21412.html.

Reprint the original address:/view/view/n20651.html.

Reprint the original address:/view/view/N2120.html.

Reprint the original address:/view/view/n16452.html.

Reprint the original address:/view/n5677.html.

Reprint the original address: /view /view/n260 1.html.

Reprint the original address:/view/n5583.html.

Reprint the original address:/view/n18441.html.

Reprint the original address:/view/view/n16222.html.

Reprint the original address:/view/view/n17746.html.

Reprint the original address:/view/n6254.html.

Reprint the original address:/view/N21941.html.

Reprint the original address:/view/n67.html.

Reprint the original address:/view/n3843.html.

Reprint the original address:/view/n3537.html.

Reprint the original address:/view/view/n18466.html.

Reprint the original address:/view/view/n3210.html.

Reprint the original address:/view/n20888.html.

Reprint the original address:/view/n2444.html.

Reprint the original address:/view/view/N21585.html.

Reprint the original address:/view/n2248.html.

Reprint the original address:/view/view/N21605.html.

Reprint the original address:/view/view/n1876.html.

Reprint the original address:/view/view/n16900.html.

Reprint the original address:/view/N22110.html.

Reprint the original address:/view/n3409.html.

Reprint the original address:/view/view/n18030.html.

Reprint the original address:/view/view/n18460.html.

Reprint the original address:/view/n5448.html.

Reprint the original address:/view/view/n122.html.

Reprint the original address:/view/n2096.html.

Reprint the original address:/view/n19194.html.

Reprint the original address:/view/n2202.html.

Reprint the original address:/view/N21221.html.

Reprint the original address:/view/n20493.html.

Reprint the original address:/view/view/n1449.html.

Reprint the original address:/view/n6003.html.

Reprint the original address:/view/view/n19203.html.

Reprint the original address:/view/n5095.html.

Reprint the original address:/view/view/n17770.html.

Reprint the original address:/view/view/n1403.html.

Reprint the original address:/view/view/n18506.html.

Reprint the original address:/view/n20910.html.

Reprint the original address:/view/view/n137.html.

Reprint the original address:/view/n22337.html.

Reprint the original address:/view/n6927.html.

Reprint the original address:/view/n2037.html.

Reprint the original address:/view/n22027.html.

Reprint the original address: /view /view/n264 1.html.

Reprint the original address:/view/n23629.html.

Reprint the original address:/view/view/n3601.html.

Reprint the original address:/view/view/n17238.html.

Reprint the original address:/view/n5668.html.

Reprint the original address:/view/view/n20241.html.

Reprint the original address:/view/n6395.html.

Reprint the original address:/view/n23676.html.

Reprint the original address:/view/n22265.html.

Reprint the original address:/view/n3092.html.

Reprint the original address:/view/n23565.html.

Reprint the original address:/view/view/n1283.html.

Reprint the original address:/view/n2389.html.

Reprint the original address:/view/view/N21775.html.

Reprint the original address:/view/n5987.html.

Reprint the original address:/view/n5935.html.

Reprint the original address:/view/n20240.html.

Reprint the original address:/view/N22117.html.

Reprint the original address:/view/view/N3014.html.

Reprint the original address:/view/n18199.html.

Reprint the original address:/view/view/n22136.html.

Reprint the original address:/view/n23670.html.

Reprint the original address:/view/n6353.html.

Reprint the original address:/view/n20248.html.

Reprint the original address:/view/n5262.html.

Reprint the original address:/view/view/n19582.html.

Reprint the original address:/view/n16415.html.

Reprint the original address:/view/n17182.html.

Reprint the original address:/view/n17517.html.

Reprint the original address:/view/n18141.html.

Reprint the original address:/view/n4647.html.

Reprint the original address:/view/view/n1983.html.

Reprint the original address:/view/view/n1885.html.

Reprint the original address:/view/n6296.html.

Reprint the original address:/view/n3343.html.

Reprint the original address:/view/view/n19505.html.

Reprint the original address:/view/view/n19246.html.

Reprint the original address:/view/view/n19465.html.

Reprint the original address:/view/n2090.html.

Reprint the original address:/view/view/n18538.html.

Reprint the original address:/view/view/N21642.html.

Reprint the original address:/view/view/n18277.html.

Reprint the original address:/view/view/N21885.html.

Reprint the original address:/view/n4548.html.

Reprint the original address: /view/n40 1 1.html.

Reprint the original address:/view/n4878.html.

Reprint the original address:/view/view/n16487.html.

Reprint the original address:/view/view/n6143.html.

Reprint the original address:/view/n22430.html.

Reprint the original address:/view/view/n18020.html.

Reprint the original address:/view/view/n18530.html.

Reprint the original address:/view/n22.html.

Reprint the original address:/view/n17180.html.

Reprint the original address:/view/n2400.html.

Reprint the original address:/view/n22548.html.

Reprint the original address:/view/n17921.html.

Reprint the original address:/view/n6803.html.

Reprint the original address:/view/n2787.html.

Reprint the original address:/view/n4826.html.

Reprint the original address:/view/n20310.html.

Reprint the original address:/view/view/n18447.html.

Reprint the original address: /view/n2 13 1.html.

Reprint the original address:/view/n4942.html.

Reprint the original address: /view /view/n282 1.html.

Reprint the original address:/view/view/n18204.html.

Reprint the original address:/view/view/n1205.html.

Reprint the original address:/view/view/n6616.html.

Reprint the original address:/view/n6829.html.

Reprint the original address:/view/view/N21490.html.

Reprint the original address:/view/n17513.html.

Reprint the original address:/view/view/N2100.html.

Reprint the original address:/view/n1190.html.

Reprint the original address:/view/n2667.html.

Reprint the original address:/view/n2458.html.

Reprint the original address:/view/view/n22133.html.

Reprint the original address:/view/view/n23614.html.

Reprint the original address:/view/view/n17020.html.

Reprint the original address:/view/N21414.html.

Reprint the original address:/view/n6959.html.

Reprint the original address: /view/n 125 1.html.

Reprint the original address:/view/view/N21822.html.

Reprint the original address:/view/n2088.html.

Reprint the original address:/view/n23546.html.

Reprint the original address:/view/n23635.html.

Reprint the original address:/view/n2593.html.

Reprint the original address:/view/view/N21424.html.

Reprint the original address:/view/n6797.html.

Reprint the original address:/view/n2352.html.

Reprint the original address:/view/n5707.html.

Reprint the original address: /view /view/n344 1.html.

Reprint the original address:/view/view/n19032.html.

Reprint the original address:/view/view/n2414.html.

Reprint the original address:/view/n4075.html.

Reprint the original address:/view/view/n1284.html.

Reprint the original address:/view/n6404.html.

Reprint the original address:/view/view/N21923.html.

"; s:8:“art _ link”； s:0:“”； s:8:“ordernum”； I:7； s:6:“imgurl”； s:0:“”； S:8: "file name"; s:0:“”； }}