Can’t the Mitsubishi Outlander start without oil?

Yes. 1 Mitsubishi Outlander cannot ignite. What's going on? Mitsubishi Outlander won't ignite. First of all, you need to check whether the vehicle's battery is charged, whether the battery voltage is normal, whether the starter motor is working, whether the carbon brush of the starter motor is damaged, whether the fuel injector is faulty or it may be caused by excessive carbon deposits. Please go to the 4S store to check as soon as possible. In addition, in case of emergency, please refer to the following instructions: 1. The battery is dead 1. Features: The starter starts to rotate but the speed is not enough, that is, it is weak. Later, the transmitter only made a clicking sound. The temperature is low in winter, and forgetting to turn off individual electrical appliances will cause the vehicle to fail to start, especially in winter. If used for a short distance and at low speed for a long time, the battery voltage will be lower than the rated value and the vehicle will not be able to start and drive normally. 2. Emergency measures: If something happens, please call the service station rescue number, or find a car to check, or temporarily check the fire situation, and then be sure to go to the service station to charge the battery. Second, the flow of gasoline is blocked. Don't wait for the gasoline to burn out before refueling. 1. Performance characteristics There is no oil pressure in the fuel supply pipe of the 3360 engine. This situation often occurs in the morning when the temperature is extremely low, and is caused by long-term scaling of the fuel pipe. When the temperature is extremely low, water and debris mix together, making it impossible for the fuel pipeline to pass, making it impossible to start. 2. Emergency method 3360: Put the car in a warm environment, and the car will start after a while; or clean the engine oil thoroughly. Third, the ignition system is not easy to use. 1. Performance characteristics: Especially in cold weather, due to the low intake air temperature, the fuel atomization in the cylinder is poor. If the ignition energy is insufficient, the cylinder will overflow, that is, too much fuel will accumulate in the cylinder, exceeding the ignition limit concentration, and the vehicle will not start. 2. Emergency method 3360: Unscrew the spark plug, wipe the oil between the electrodes, and reassemble it in the car. A thorough approach is to check the ignition system and eliminate the causes of low ignition energy, such as spark plug electrode gap, ignition coil energy, high-voltage line status, etc.