Introduction to the steps and methods of wall brushing.

In home decoration, putty is a special demand with clever decoration. If the putty is scraped well, the wall will be very flat and smooth. If you don't shave, all the decorations will be lowered. So, what are the steps to paint the wall?

Steps for painting and fixing the wall 1. Steps for painting and fixing the wall: First, you must choose good quality putty, which is the condition for plastering the putty. Master the proportion of putty and water, and then mix well.

2, the steps of painting the wall: the wall base is cleaned, if there are seams or corners, then you need to use gypsum powder to repair, pat or paste paper. If you apply putty, you usually scrape it three times. During construction, you must wait until it is relatively dry before scraping putty.

3. Steps of wall painting: The thickness of putty should be controlled at about 2mm, which should not exceed the requirements of this size.

4. If the weather is cold and there is putty, keep it. It is necessary to avoid cold wind blowing, so although it seems that it can fly over the wall, it actually blocks the moisture on the wall. Internally, if the next step is taken at this time, the undried wall materials will gradually evaporate and appear "dry crack" when heating in winter.

5. Fixing steps of wall painting: finally, implement thin grinding, and the angle of yin and yang should be horizontal and vertical. When scraping putty, immediately dispose of residue or sand.

Second, the method of painting the wall.

In the circumferential plane of the production line, the end of the scraper is pushed forward at an angle of 30 degrees to 45 degrees, and the filler is excessively compressed to the right side of the scraper in the concave part and putty. The scraper is scraped to the front end, and the tip of the knife rotates at an angle of 45 degrees to scrape backwards. Then scrape the putty into another depression, and align the excess putty with the left side of the scraper. In this way, you can walk back and forth and fill the whole surface.

Summary: That's all that Bian Xiao introduced about the steps of painting the wall. I think you have a little understanding after reading it!