How to use BYD f0 low beam and high beam?

BYD f0 lever is only on the switch? Low beam lamp? In this gear, turn the handle of the light control switch to the low beam position, and the low beam will be lit. Turn the switch to the engine compartment position, and the high beam is always on; Pull back to the first gear, turn off the high beam and restore the low beam; Then move one gear in the driver's direction and flash the high beam for a while. After releasing the switch, the switch will automatically return to the low beam gear.

Use of low beam lamp: The low beam lamp must be turned on under the following circumstances. When driving in a dark area without street lamps, and when driving at dark or dawn night, you must turn on the low beam. If you catch up with fog, heavy snow and heavy rain, you must turn on the low beam even during the day. Although some road sections have lighting equipment, the brightness is not enough. At this time, you should also turn on the low beam.

Use of high beam: Only when there is no other lighting equipment on the road and there is no vehicle opposite, can the high beam be used. Otherwise, it will seriously interfere with the other party's sight and even cause traffic accidents. Be careful not to mistake the high beam for the low beam. In the following cases, you must immediately replace the high beam with the low beam.

(Photo/Text/Photo: Liang Kexin) @20 19