How to thaw the glass water when it is frozen in winter?

1. First of all, understand that glass water is frozen. Under normal circumstances, there are only two reasons. One is to pour water into it, and the other is special glass water for winter, which is not used in winter. Then let Bian Xiao share the method of thawing.

If the glass kettle is frozen, please don't turn on the wiper and water switch again, because the kettle is frozen. If you still use the wiper, it is easy to damage the wiper motor.

If you are in a hurry to use the car, and the kettle is only slightly frozen and the water pipe is not frozen, you can pour warm water to melt the frozen place. Remember to wash all the water in the kettle before the temperature drops, and then change it into special glass water for winter, otherwise the glass water will freeze again if the temperature is too low at night.

If you are not in a hurry to use the car, it is only because the weather suddenly turned cold and you forgot to replace it, but the glass kettle has frozen and can still be used in fine weather. When the sun is shining, open the lid and let it dry. As long as the glass is not too cold, it will melt in a short time. If it doesn't melt, it is recommended to add some warm water, be careful not to pour boiling water, melt the glass, and replace the water inside after melting to avoid freezing again next time.

If the glass kettle is frozen, it should be thawed at high temperature, and it is best to use the high temperature generated by engine operation. Because the engine is running at about 90 degrees, the engine compartment temperature is also tens of degrees, which is much higher than the outside air. Many pipes pass through the top of the engine, and the kettle is also in the engine compartment. Therefore, after the engine is running for a period of time, the glass water will thaw itself when the temperature rises. After that, it must be replaced with glass water for winter.