How to deal with winter construction of real stone paint?

What should we pay attention to when constructing real stone paint in winter?

Although technical measures are taken to add antifreeze in the construction of real stone paint in winter, due to the characteristics of real stone paint construction itself, The following problems still exist, which will bring many disadvantages and hidden dangers to the construction and quality of real stone paint, and may cause serious quality problems.

1. The construction of real stone paint uses an air pump and air jet molding. Due to the cold weather, there will be poor air flow and clogged gun nozzle, resulting in the inability to spray and the unsmooth discharge of the nozzle, resulting in a spray paint surface. Uneven phenomena.

2. The thickness of real stone paint is 2-3MM, and the drying cycle is long. Calculated based on the current temperature, it will take at least a week to dry real stone paint. At the same time, the night temperature is below minus 6-8℃. Although Adding antifreeze [antifreeze is effective below minus 5°C] will still cause freezing.

3. After the real stone paint is frozen, it melts again when exposed to heat. After repeated freezing and thawing, the rubber powder in the real stone paint will lose its effect, causing the real stone paint to return to alkali, become powdery, and fall off. The construction quality will not be guaranteed.

4. Real stone paint will become soft after adding antifreeze, cannot reach its original hardness, and its service life will be reduced.

In view of the above reasons, it is recommended that Real stone paint is not suitable for construction under the current weather conditions.

Otherwise, there will be too many hidden dangers in the construction quality of real stone paint.