How to use the headphones with iPhone 7

How to use Apple 7 wired earphones

Insert the EarPods earphones with Lightning connector into this slot to get the best sound effect. The newly designed iPhone7 cancels the traditional 3.5mm headphone jack. If users want to use wired headphones in the future, they will need to use a Lightning to 3.5mm headphone jack converter.

Illustration of how to use Apple 7 earphones

1. Connect Apple 7 original earphones.

Find the charging interface of iPhone7. The traditional charging interface (also called Lighting interface) is located at the bottom of the phone. Insert the earphones with Lightning connector into the charging port, and finally put the earphones in your ears. For the best sound effect, make sure the right earphone (marked with "R" on the earphones) is in the right ear, (marked with "L" on the earphones) In the left ear.

2. Use iPhoneLightning dock.

Connect the headphones with the 3.5mm audio jack to the iPhone Lightning base to listen to music while charging. Just connect according to the diagram.

3. Connection of Apple 7 headphone jack converter.

Find the charging interface of iPhone7 and insert the Lightning connector of the converter into this slot. Finally, plug the 3.5mm jack headphones into the headphone jack of the converter and you can use the headphones.

Extended information

Maintenance of Apple headphones

1. Maintenance of the headphone head. At present, many headphones choose gold-plated heads, which is very helpful in reducing impedance. Excessive wear and tear will also cause changes in sound quality. This layer of gold plating is generally very thin. If it is pulled out many times, the surface will wear out quickly, which is not only bad for the headphones, but will also cause the interface of the machine to become loose, resulting in problems such as poor contact.

2. The connection between the headphone cable and the headphone is only fixed with rubber. There are solder joints inside. Forcibly pulling the cord down to pull out the earphones can easily cause the solder joints to fall off, which is also undesirable. There is another point mentioned here, which is not to use too much force or too fast when pulling out.

3. Although today’s headphone pickles are much better than before. But also be careful. Even for wires made of hollow materials such as 888, you must pay attention because there are still metal wires inside. If you don't pay attention when collecting it and fold the wire at a hard angle, it is very easy to cause the wire to break and damage the earphones. Therefore, a certain arc shape should be retained when folding the line.

Mobile phone, the full name is mobile phone or wireless phone, usually called mobile phone. It was originally just a communication tool. In the early days, it was also commonly known as "Big Brother". It is a portable phone that can be used in a wide range of The terminal was first developed from the field mobile phone manufactured by Bell Labs in the United States in 1940. The following is how to use the Apple 7 wireless headphones that I have collected for everyone. It is for reference only. Everyone is welcome to read!

How to use Apple 7 wireless headphones

1. Click "Settings" on the mobile phone desktop.

2. Find and click "Bluetooth" in the menu.

3. Click to turn on Bluetooth.

4. Take out the Apple AirPods and bring them close to the iPhone that needs to be connected.

5. The phone will automatically recognize and pop up the window.

6. Unlock the phone screen, enter the "Bluetooth" page, and click "Connect via icloud".

7. Wait a few seconds and the Apple AirPods will be successfully connected.

Special Tips

Apple AirPods does not have a headphone cable, so be careful not to lose it.

How to pair Bluetooth headphones with iPhone 7?

1. First open the iPhone 7, then find the "Settings" icon on the desktop of the phone and click to enter, as shown in the figure below.

2. After entering the settings interface of the iPhone 7, find the "Bluetooth" item and click to enter.

3. After entering the Bluetooth interface of the iPhone 7, turn on the switch in the "Bluetooth" column.

4. Finally, search for the Bluetooth headset and pair it.

Tutorial on how to use Apple headphones

Question 1: How to use Apple headphones iPhone 6 standby state headphone functions:

●Press the center button once, and then press it again Playback can be continued, this technique can be used to pause the playback of songs or videos;

●Press the center button twice quickly to skip to the next song;

●Press the center button quickly Three times to return to the previous song;

●Press the center button twice quickly and hold it down to fast forward the song or video;

●Press the center button three times quickly And press and hold to rewind playback.

●Press the "+" or "C" button to adjust the iPhone 6 volume.

AneData all-purpose file recovery, super data recovery tool supports hard disk, mobile hard disk, SD card, U disk, camera, mobile phone memory card

View

Headphones when iPhone 6 receives a call Functional skills:

◎Press the center button once to answer an incoming call;

◎Press the center button once to end the current call;

◎Press and hold Center button for about two seconds and then release to reject the call! Two low beeps will confirm that the call has been rejected;

◎Press the center button once and again to switch back to the original call, switch to an incoming call or a held call, and put the current call on hold.

◎Switch to an incoming or held call and end the current call: Press and hold the center button for about two seconds, then release. Two low beeps confirm the end of the first call.

Other status function tips for iPhone 6 headphones:

◆Use Siri or "Voice Control" to press the center button to start speaking.

◆When playing music or videos, users only need to touch the "Center Button" key to pause the music/video, and touch it again to continue playing.

Question 2: How to use Apple 6splu headphones tutorial method 1 (in standby mode)

1. When we pause playing a song or video, we only need to press the middle button once That's it, press it again and you can continue playing.

2. When I listen to a song and need to jump to the next song, I just need to quickly press the middle button twice to switch songs.

3. When we need to fast forward a song, we only need to quickly press the middle button twice and hold it down.

4. When we need to rewind a song, we only need to quickly press the middle button three times and hold it down.

5. When we need to adjust the volume, we only need to press the "-" or "+" button.

Method 2 (when receiving an incoming call status)< /p>

1. When we need to answer an incoming call, we only need to press the middle button once to answer the call.

2. When we need to hang up the current call, we only need to press the middle button once.

3. When we need to reject an incoming call, just press and hold the middle button for about two seconds, and then release it. Two beeps will confirm the call has been rejected.

4. But we need to switch to the current call or just press the middle button once and press the button again to switch to the original call.

5. When we need to switch to the current call and end the current call, just press and hold the middle button for about two seconds, and then release it. There will be two beeps to confirm that the call has ended.

Method 3 (in other states)

When we need to use Siri or "Voice Control", we only need to long press the middle button.

Question 3: How to use Apple headphones? And headphone maintenance method 1. Although the sound quality of Apple headphones is very average, the small wire control is really charming. You can control many iPhone functions through this wire control. 1. About playing songs: Pause playing songs and videos: Press the center button once to pause playback, and press it again to continue playback. Select next song: Press the center button twice to listen to the next song. Return to the previous song: Press the center button three times in succession to listen to the previous song. Fast forward: Press the center button twice quickly without lifting your finger to fast forward. Rewind: Press the center button three times quickly without lifting your finger to fast forward. 2. About the phone: Answer the phone: Short press the middle when there is an incoming call. Hang up the call: Short press the center after the call is connected. Reject a call: Press and hold the center during an incoming call. Do not disturb incoming calls: Press Volume Up or Volume Down once. In addition, long press the middle button to activate voice control at any time. You can say call XXX. . . , or directly call the contact's name or phone number. You can say "shuffle play" to turn on the music playing function. If it is not turned on, she will ask you whether you want to turn it on. Just answer "yes" and it will be OK. Second, below we will introduce some of the most commonly used maintenance methods. In fact, we cannot avoid the cold in winter. When we go out, we can only rely on the earphones. But when we return indoors, we should give the earplugs a good rest. 1. Let the earplugs stretch for a while. 2. Maintain a dry environment. The weather in the north is relatively dry, and many people turn on humidifiers in winter. But be sure not to place headphones around the humidifier, otherwise your earplugs will turn yellow soon. In the humid environment in the south, we still recommend that users use a desiccant (use a drying box if possible). Desiccant Just use the desiccant in the snack packaging. Like most digital products, moisture is one of the killers of headphones. 3. Don’t learn to fly when you have nothing to do! In fact, there are not many maintenance methods, as long as you treat the headphones well. Actions like pulling don’t need to be introduced too much, they are definitely NO! However, the action below is probably the most common behavior of a helicopter spin. Everyone will think that their earplugs are strong enough, maybe because they are cheap, or because they have too much chakra to consume, so switching to earphones becomes a symbol of doing nothing. However, the more turns you make, the more quickly your earbuds will develop poor contact.

It goes without saying why! Just mind your own hands.

Question 4: How to select headphone mode 1 setting on Apple mobile phone

-General-

Accessibility function

Using incoming calls during physical activities (Headphones)

Question 5: How to use the Apple 7 earphones. The Apple 7 has eliminated the traditional 3.5mm headphone jack and cannot directly use earphones with ordinary 3.5mm plugs. But you can use the headphones in the following 4 ways.

1. Use the EarPods earphones with the Lightning connector that comes with the iPhone 7. The EarPods earphones with the Lightning connector have better audio transmission and stability. Compared with the previous 3.5mm earphone design, the sound quality has improved. promote.

2. Use the included Lightning to 3.5mm headphone jack converter to connect headphones with ordinary 3.5mm plugs.

3. Use Apple’s newly launched AirPods wireless headphones to get rid of the shackles of wires.

4. Use Bluetooth headsets that comply with the Bluetooth transmission protocol. After turning on the Bluetooth headset, enter the settings interface of the phone, click Bluetooth, turn on the switch slider on the right side of Bluetooth, and wait for the Bluetooth headset to be automatically searched and matched.

Question 6: How to set up the Apple headphones when there is no sound? Plug the headphones into other mobile phones or MP3 players to see if it is a problem with the headphones or the mobile phone.

If the problem is with the headphones, it may be that the plug is oxidized. Use an eraser to wipe off the outer oxide layer and insert it again. If it doesn't work, the components inside the earphones are damaged and should be sent for repair.

Treat mobile phone problems as follows:

1. Check whether the music player and system volume are adjusted appropriately.

2. The mobile phone jack has been oxidized. Wipe it with a cotton swab dipped in absolute alcohol and try inserting it again.

3. The mobile phone is too laggy, causing slow response. Clean up the junk on the mobile phone, delete unnecessary things, shut down and restart.

4. Back up the files and restore the phone to factory settings (or reset the phone).

Question 7: How to switch the IPHONE between the headphone state and the normal state? Plug in the headphones to enter the headphone mode, and unplug the headphones to return to the normal mode.

If your iPhone is not like this, but automatically enters headphone mode without plugging in headphones, there are several methods on the Internet:

Method 1: Plug in your headphones and turn on Listen to MP3, listen for a while, then click stop, then unplug the headphones directly and continue playing the song you just stopped. If there is sound, it will be fine.

Method 2: Click Settings---General---Restore---Restore all settings in the iPhone. Then you can solve the problem of no sound.

Method 3: Use Use a toothpick to poke the headphone jack when playing MP3. The principle is the same as method one.

Method 4:. . .

Method five:. . .

Method six:. . .

But according to my verification, all the methods currently provided cannot cure this problem.

Because the problem still lies in the PCB circuit itself. There is a problem with a MOS transistor (number: Q1_AP). If you want to replace it, you need to remove the shielding cover close to the SIM card, which is risky.

There is also a safe way to remove the resistor R13_AP, but then it will stay in the normal mode and never return to the headphone mode. Haha, you can figure it out yourself.

This is the ultimate solution. Don’t try it if you don’t have professional skills. Don’t try it! ! !

Question 8: How to operate Apple headphones quickly 1. To listen to music and answer calls, press to start playing music, press again to pause playback, press the middle button to answer and hang up calls

2. Press the earphones twice quickly and the music will automatically switch to the next song. Press the earphones three times quickly and the music will switch to the previous song.

3. Pay attention to the small square in the middle of the Apple earphones. Don’t ignore it. It has many functions. What should you do if you want to fast forward when listening to music? Press the small square twice. The second time Don't let go until the music fast-forwards to the place you want, then let go. To rewind, press rewind three times in a row. Don't let go on the third click. Let go when the music fast-forwards to the place you want to hear.

4. The control button in the center of the Apple earphones is like the Home button, which turns on the voice assistant. When you want to call someone, you only need to press that button and say call so-and-so into the earphones.

5. When listening to music, it is too troublesome to turn over and over. At this time, you press and hold the button in the middle of the earphones. After hearing the system prompts, say to the earphones "Play You are my most beloved". Woman, this song will automatically play at this time.

6. After turning on the camera, you only need to press the + on the earphones, and the camera will automatically take pictures.

(I used Apple headphones before, but now I use Guwei headphones, they are almost the same)

Question 9: How to use the Apple headphone cable for the fast forward function of Apple wire-controlled headphones How to control while listening to music:

Pause a song or video: Press the center button once, then press again to resume playback.

Skip to the next song: Press the center button twice quickly.

Return to the previous song: Press the center button three times quickly.

Fast forward: Press the center button twice quickly and hold.

Rewind: Press the center button three times quickly and hold.

Adjust the volume: Press the + or C button.

Question 10: How to get the best sound quality when using Apple 5 headphones for the first time? 10 points suggest burning in the headphones. All new headphones need to be burned in

First of all, there is no requirement for music to burn in the headphones. Just use Snowflake Sound at the beginning, which will cause less damage to the headphones. Later, just use the music you usually listen to. Can.

The method of burning in headphones is as follows: Use the snowflake sound from the radio station to play for 48 hours without continuous playing. Start playing at a very low volume, and take a break every four or five hours. It will last about 24 hours. The ratio of low volume when listening to music is usually 9, so just turn the power off to 4, then use MP4 and put the headphones aside to play songs, turn the volume to about 5, and take a break every half day. The length of rest time should be controlled between 1-2 hours, so it will be enough for about a week. Remember not to turn up the volume too high at first. After using it for about 50 hours, the sound and quality will basically come into play.

Burn-in is actually a process of accelerating the running-in of the original parts and wires. It can be driven continuously for dozens of hours. Of course, the running-in is fast. If you do not pursue this speed, natural use is actually the most suitable.