Meizu m 1 turn it off. What's the matter with breathing light flashing all the time above the screen?

1) Press F8 immediately after startup until advanced options appear. Select Last Known Good Configuration and press Enter to repair it. Now you can't press F8 to enter the safe mode to restore or reinstall the system (if the reinstallation also crashes, it is recommended to repair it. If you can enter the safe mode, it means that you installed inappropriate things, uninstalled all the inappropriate things downloaded before the accident, or restored or reinstalled the system).

Soft before hard, such problems are caused by software conflicts, inappropriate drivers and system problems. Can you restore the system in safe mode, or can't reinstall the operating system, don't install software, patches, drivers, and boot it to see if there are any problems? Don't install drivers, patches and software step by step, and don't install them if you find them inappropriate.

The current situation is caused by hardware. Take out the battery of the motherboard, discharge, plug in and out the memory, clean up the graphics card, and check whether there is any problem with the hard disk. If it doesn't work, fix it.

2) If this is always the case, first soft and then hard, reinstall the operating system, and do not install software, patches, drivers, etc. , see if there is any problem with the boot. Don't install drivers, patches and software step by step, and don't install them if you find them inappropriate (ask me if you have any questions).

Please note: if you restore or reinstall the system, when installing drivers, patches, software and other things, you must not install things that affect your accident this time, otherwise it will be futile to restore or reinstall.

3) Hardware, such as hard disk and memory. , whether there is a problem, CPU and other hardware temperature is on the high side, if it is caused by hardware problems, it is recommended to repair.