Tips for repairing wooden floor bulging

1, use a humidifier. The reason why the wooden floor will warp is that the floor is too dry because of too much water loss, so it will warp, so it is very suitable for using humidifier indoors. It can increase indoor humidity and then reduce edge warping.

2. Use a hair dryer. If there is a slight bulge in the floor at home, you can treat it with a hair dryer, blow directly at the raised part of the floor, and then blow away the moisture on the floor until the floor is almost restored to its original state. One thing to note is that the air conditioner must be turned on. If hot air is turned on, it is easy to increase the moisture of the floor, which is counterproductive.

3. Remove the floor. Some people's floors are special and can be removed by themselves. If the floor is tilted due to moisture, it can be tilted directly to make the water inside evaporate as much as possible. This method is considered as a method to solve the basic problem, and can directly solve the problem of wet floor.

4. press heavy objects. If the wooden floor is not seriously tilted, or only slightly tilted at the joint, you can put some heavy objects on the tilted floor, hold it down, and wait for a while, and it will slowly return to its original shape. This method can only be used on the floor with slight conditions. If the floor is severely deformed, this method is useless.

Villa master provides you with local architectural policies, architectural drawings and villa design drawings;

Villa appearance rendering service, you can choose from thousands of red-hot drawings: www.bieshu.com? bdfc