3. Model clauses of company logo management regulations

In order to standardize the management of the company's regional logos and enhance the company's image, the Company Logo Management Regulations are specially formulated. The following are the management rules of company logo, please refer to them.

Model text of company logo management regulations 1

1.

This system is formulated in order to standardize the management of company's regional logos and enhance the company's image.

2. Scope

Applicable to all kinds of internal and external logos of the company.

3. Responsibility

3. 1 The Technology Development Department is responsible for the release, design, supervision and inspection of the identification standards for process pipelines and pipe racks throughout the company;

3.2 The Safety Production Department is responsible for the release, design, supervision and inspection of all kinds of safety signs and equipment (storage tanks) name recognition standards throughout the company.

3.3 The General Management Office is responsible for the release, design and production of the company's public facilities, conference reception and visiting inspection identification standards.

3.4 The Human Resources Department is responsible for the release and design of wall-hanging systems, standards and other identification standards, as well as the supervision and inspection of various signs.

3.5 Each workshop (department) is responsible for putting forward the production requirements of the logo according to the work needs of the department, and is responsible for the use and daily maintenance of the logo.

4. Method and process control

4. 1 Identification type

Signs include various traffic directions, warning signs, parking instructions, safety regulations, warning signs, process pipeline flow signs, color ring signs, workshop (department) name signs, wall-mounted management regulations, quality management signs, etc.

4.2 Production of signs

4.2. 1 The design and production of all kinds of logos must conform to the overall tone and requirements of the company, unless it is clearly stipulated by the state (department).

4.2.2 Each department shall put forward the production requirements of the logo according to the work needs, and after examination and approval according to the Material Procurement Procedure, each department shall be responsible for unified and coordinated production according to the division of responsibilities.

4.2.3 In the case of marking production, the supplier is required to design renderings or make samples before production after confirming that the use requirements are met.

4.2.4 identify production, after the installation is completed, the application department and procurement personnel are responsible for the acceptance of the effect and quality of all signs.

4.3 Provisions on the Use of Signs

4.3. 1 Each process pipeline of the company shall be printed with the corresponding medium name, material flow direction and material corresponding color ring according to the standard;

4.3.2 Printed and sprayed signs (arrows, names) should face the position that personnel can clearly see;

4.3.3 The pipe rack shall be marked with height limit.

4.4 All operating equipment, storage tanks, cofferdams, relevant walls and storage tanks of the company have obvious identification plates;

1) Each operating equipment shall be equipped with a standard nameplate, which shall be embedded, fixed or hung in an obvious position for easy viewing and identification.

3) Various equipment rooms, such as power distribution room, water pump room, garage, parking garage, etc.

4) The road traffic signs in the factory area should be complete, the entrance to the residential area should be marked with no traffic and speed limit, and the main intersections and other public places should be marked with directions.

5) Parts shall be marked with height limit, speed limit and no honking.

6) Hanging in a conspicuous place? Fire map? 、? Don't use the elevator in case of fire. Identification of. Fire signs for fire exits and basement entrances.

7) Hanging on the transformer and ring network cabinet? High pressure danger, please stay away? Bulletin board.

8) All computer room entrances and exits should be hung? Don't enter the computer room unless it is important. Plates.

9) Near the waterscape? Please don't play in the water? Signs, which must be on the railing? Please don't cross? Or? No climbing? Signs; emblem

10) Identify the mechanical and electrical equipment according to the name of each equipment and the person in charge of the equipment, and the signboard should be hung in a conspicuous part of the equipment.

1 1) The name of the inventory material should be posted on the shelf or material and at the door of the warehouse? No fireworks? Bulletin board.

12) Identify the greening name, growth habit, family and place of origin. The main parts shall be set with green signs consistent with plants, and the installation position shall be eye-catching, and the signs shall be clear, complete and tidy.

4.5 In the process of service, prompt signs should be set up in an eye-catching position according to the content and nature of the service, and the prompt signs should be removed after the service.

1) When working high above the ground, warning tape should be used to enclose the warning area around the dangerous area, and the property in the area should be well protected and placed? Stay away from danger? Bulletin board.

2) When overhauling power distribution equipment, hang it on the switch? Is it forbidden to close the door when someone is working? Bulletin board.

3) clean the lobby and put it in a conspicuous place in wet and rainy weather? Slide carefully? Bulletin board.

4) spray paint in public places. If the oil knee is wet and there is no staff on site, it should be placed in a conspicuous place? Don't touch the wet paint? Bulletin board.

5) Unqualified materials should be isolated from qualified materials? Unqualified materials Signs; emblem

6) All staff must wear work clothes and badges during working hours.

4.5.2 The division of office areas shall be marked by departments.

4.6 Identification management

4.6. 1 The user or community cleaner is responsible for the daily cleaning and maintenance of the installed signs.

4.6.2 If the logo is found to be polluted, smeared, torn, damaged or meaningless, it shall apply for replacement, substitution or direct cancellation in time.

4.6.3 When the fixed sign needs to be changed or cancelled, it can only be implemented with the consent of the department. When the change has a great impact, it must be reviewed by the comprehensive management department of the affiliated company before implementation.

4.6.4 The comprehensive management department of each branch shall check the use of various signs from time to time, and instruct the responsible department to make rectification within a time limit for those that do not meet the requirements of the company's specifications.

4.6.5 When traceability is required, its unique identification shall be recorded.

4.7 Identification of records

4.7. 1 All kinds of records are valid marks. When filling in the records, each item should be truthfully and completely filled in and signed by the person in charge for confirmation.

4.7.2 Each department shall make records regularly in chronological order and keep them properly.

5. Supplementary provisions

5. 1 The Human Resources Department is responsible for the interpretation of these Measures.

Model law on the management of company logo II.

Article 1 This Code is formulated to strengthen the management of company logos and standardize the overall image of enterprises.

Article 2 The company implements the labeling system. The administrative department is responsible for formulating, adjusting and publishing the catalogue of label management.

Article 3 Personnel who need to use the company logo must abide by these Measures. Anyone who uses the company logo for external publicity must obtain the permission of relevant departments, and may not use the company logo for all external activities without permission.

Article 4 The Administration Department is responsible for the approval, supervision and management of the company logo.

Article 5 How to use signs:

(1) Scope of use: the overall image publicity created by Jide, and the use of this logo is integrated and promoted by commercial companies.

(2) Logo images should be unified and distinct to ensure the uniqueness of the company logo.

The company LOGO should be left blank at about 1CM in the use process to ensure the seriousness and non-intrusive of the company logo.

(three) when using the logo, the graphics must be accurate and enlarged or reduced according to the prescribed style, and the proportion and tone of the graphics shall not be changed without authorization.

During the use of the logo, the licensee shall not change the logo in any way, such as adding, deleting, deforming or distorting it.

Article 6 whoever designs and prints post-it notes, cards, etc. When it comes to the company logo, there must be a unified style. Standardized fonts should be used when printing, and the logo should be bright and clear. When you receive printed matter, you should check the goods and labels.

Seventh in violation of the provisions of these measures, depending on the seriousness of the punishment.

Article 8 The administrative department shall be responsible for the interpretation of these Measures.

Article 9 These Measures shall come into force as of the date of promulgation.

Model Law on the Management of Company Logo 3

1. Objective To standardize the use of the company's factory buildings, workshops, office space and equipment, make all kinds of signs in good condition, give full play to their warning, prompting and education functions, and further standardize and ensure safety in production.

Second, the scope of application

Suitable for the use of the company's factories, workshops and offices, equipment, etc.

Three. accountability

1. The enterprise management department is responsible for the production, inspection and recycling of contact signs to ensure the rational use of the signs.

2.ISO office confirms the production standard of labels and supervises the on-site storage of labels.

3. The Safety and Environmental Protection Department is responsible for supervising and inspecting the usage specifications of safety and environmental protection labels.

4. Each department is responsible for the use, storage and update of all kinds of signs within its jurisdiction.

5. The company office is responsible for the examination and approval of the signboard production application.

Four. working procedure

1, application for making signs

National standard safety warning signs (PVC materials) are applied for procurement in a unified way, and externally made signs are applied for production in strict accordance with the requirements of the application for production work instructions, and can be printed and pasted on paper below A3 by themselves.

2. Signboard management

1) signs should not be placed on movable objects such as doors, windows and shelves, so as to avoid losing sight of safety signs after the positions of these objects are moved. No obstacles that hinder reading shall be placed in front of the sign.

2) The layout of site safety signs should be designed first, and then arranged.

3) Site safety signs shall not be moved at will. If it is really necessary to change the venue, it should be reported to the ISO office for filing and replacement.

4) Logo signs purchased in the market or produced by factories are confirmed by ISO office and enterprise management department on site and then input into Kingdee K3 system to form regional cargo control.

5) Each department is responsible for keeping and maintaining all kinds of signs within its jurisdiction. The shelf life of signs purchased or visually produced by the marketing department is 6 months, and the shelf life of signs made by the company itself is 65,438+0 months. If the signs of various departments are damaged, deformed, faded or lost within the above-mentioned prescribed time limit, it shall be implemented in accordance with the punishment provisions of this article.

6) In case of damage, deformation, fading or loss of the existing identification marks of articles in various departments and regions, an application shall be made through the Application Form for Identification Marks. ISO Office shall verify the specified service life of existing identification marks and replace them with new ones. The ISO office centrally manages and records the use, distribution and recycling of all kinds of logos, and the recycled logos shall be invalidated and reused as much as possible. If it is confirmed by the person in charge of ISO office that it cannot be used, it can be handled according to the requirements of solid waste operation management documents; Newly purchased or manufactured signboards shall be implemented in accordance with the process of "Signboard Manufacturing Instruction".

7) in? 6S？ During the inspection, the signs on the site shall be confirmed and inspected. If any nonconformities such as damage, deformation and fading are found, the responsible department shall be notified to make timely rectification.

3. Penalty clause

If all signs are found to be defaced or lost during the inspection, compensation shall be made at 130% of the original price, and a fine shall be imposed on 50 yuan.

Five, these Provisions shall come into force as of the date of promulgation.

Documents related to intransitive verbs

? Mr. /ZX-553/02-ISO "Work instruction for applying for making signboards"? Company logo standard manual

Seven. Related records

? Application Form for Making Signboards MR/ZX-553/02-02

Application form for making signboards

Model articles related to company logo management regulations:

1. 3 model articles on the company's meeting management system

2.6 demonstration articles about warehouse management system.

3.3. Provisions on the Use and Management of Safety Signs

4.3 Safety signs management regulations

5. Provisions on the Administration of Office Area 3