F 1 prt 2009 How can the crown block slip when it rains?

Down, that's for sure. It's too fake not to slip.

Changing tires can only solve part of the problem, and it will definitely be slippery, much more slippery than dry land.

Generally, changing tires depends on the rainfall. When it rains lightly, that is, when the track is wet and slippery, as shown below, when the rainfall is not very heavy (as can be seen by visual inspection), a set of neutral tires will be changed and it will drive away. If the weather warning he gave was the weather: Moonsoon, be honest and change the tire for a rainstorm.

Changing a tire is easy. If you are still in Room P, just click the wrench button in the toolbar and you will enter the basic settings page. On the tires, choose intermediate tires, that is, neutral tires, choose Wet/Rain as wet tires, and Moonsoon as rain tires (in PRT, MS has no rain tires ... it runs like rain tires when it rains).

If you have been on the track and something unexpected starts to rain, you need to change your game strategy temporarily. This is the strategy before the game, and temporary changes are allowed during the game.

Press LCD mode, the default is Enter on the keyboard, and press it several times to enter the strategy screen. Originally, this screen was above the steering wheel, but obviously, no one installed an LCD on the steering wheel in 2009, but after switching to the viewing angle of the TV cockpit, a yellow box will appear on the right side of the screen, which is the same. Then adjust the corresponding setting items by adjusting LCD Up and LCD Down. By default, it is the up and down key, and then use LCDCreate and LCDCreate (by default, it is the left and right key) to adjust the value.

After the adjustment, press Enter to return to other screens (if it is in the strategy selection screen, the staff will not move when entering the station), and then press Pit Request to enter the station in the next lap.