How to use Chevrolet Malibu cruise control, diagram of how to use Malibu cruise control

Chevrolet Malibu cruise usage diagram: As shown in the figure, there are three rows of buttons. The rightmost button starts cruising, and the leftmost button stops cruising. Stopping does not mean shutting down. To turn it off, press the rightmost button...the middle button (to be precise, it can only be switched up and down but not pressed) has four functions. Okay, first turn on the cruise control, press the rightmost button, then the white light on the instrument panel will light up, then drive your car to more than 40 miles, then turn the middle button down to activate the cruise control, and then release Press the accelerator and the car will maintain the speed you set. Then you can turn the button up or down (yes, it's the one we use to start cruise) to adjust the cruise speed. Then you can press the stop button on the left or step on it. one time. If you still want to cruise at top speed, dial that button up. If you want to cruise at your current new speed, dial it down. Please note here that if your last cruise was 120, then your speed has dropped to 60. If dialed up, the car will accelerate quickly, feeling a short push back, and the speed will be very high. In addition, although the cruise control system is very convenient for car owners who drive at high speeds for a long time, it should be noted that high speed driving can easily make the driver sleepy. Cruise control does not require too much control of the vehicle and can easily cause the driver to lose focus. Dispersion affects driving safety. Cruise control is also affected by weather and road surface factors, so it is prohibited to use the cruise control system in rain, snow and complex terrain.