The groove under the balcony window accumulates water when it rains. How to solve it?

The master who inspected my home could tell at a glance that the leaking window was not caused by the lack of sealing strips installed on the window, but rather by the exterior wall cement being applied first and then the window frame being installed during the renovation. : The window frame does not match the size of the window opening, and the balcony leaks. I believe many of you have encountered this situation. Some people don’t know what to do, but the workers completely ignored the responsibility! It turned out that the worker saw that his friend was a layman, so he only put some sealant on the window sealant, without finding out the cause of the leakage at the top edge of the window. The balcony window leaked whenever it rained. This was really annoying. things. How can this problem be solved? Let me tell you a few tricks to get it done quickly! I have also seen that the outside looks fine, but there is still water leakage. Now, in order to save trouble, some workers only care about appearance when they install the windows and then plaster the outside.

Use You need to mix it when you put it together, and it will dry in 10 hours. After drying, it will be as hard as iron. Just press it into the seam. Please follow me and send me a private message. I will also send you the video. It is also sold on a certain treasure. It is said that we must understand the cause of the leakage, and then confirm it one by one according to the troubleshooting method, and finally find the cause of the leakage and solve the leakage problem symptomatically. This is the best repair plan! Fourth, it is the window frame. Did the master install expansion screws when fixing the lower opening of the window frame? If he did, did he seal the heads of the expansion screws with sealant to prevent waterproof water from seeping through the screw holes? leak down. If the lower part is leaking, you need to first check whether the platform outside the window has a slope. If not, apply some waterproof paint, then use cement to apply some slope, and finally apply glass glue to the joint between the window and the slope.

I don’t understand what’s going on here, can you please make it simpler and clearer: There is usually a drainage outlet outside the lower window frame. If it is blocked, rainwater will flow in. You can try to find a piece of iron wire to pass it through. try! Summer is the rainy season in the traditional sense, with lots of stormy weather. At this time, window leakage has become a problem that worries many people. The causes of window leaks vary, and so do the solutions. I have also seen that the outside looks fine, but there is still water leakage. Now, in order to save trouble, some workers just install the windows during the work and then plaster the outside to save face.