Function and use of wall reinforcement

Wall reinforcement is a common wall treatment material, its main function is to enhance the hardness, wear resistance, waterproof and pollution resistance of the wall, and at the same time, it can fill holes, cracks and depressions in the wall, making the wall more flat and beautiful. Here's how to use the wall fixtures:

1. Wall cleaning

Before using the wall material, the wall surface must be cleaned to remove impurities such as dust and oil stain, so as to facilitate the adhesion of the wall material.

2. Stir well

Pour the wall into a clean container, add a proper amount of water, and then stir it evenly with a stirring rod or electric tool until it forms a paste.

touch bottom

Use a scraper to evenly smear the wall solid on the wall surface, covering the whole wall surface, and be careful not to leave the phenomenon of different thicknesses.

4. Intermediate layer

After the bottom layer is finished, wait for it to dry a little, and then smear the wall solid on the wall with a scraper to form a relatively flat middle layer.

5. The last floor

After the middle layer is slightly dry, apply a layer of solid wall, and pay attention to covering the whole wall to make it more flat.

polish

After the wall is completely dry, use a grinder or manual grinding tool to grind the wall to make it smoother and smoother.

It should be noted that products with good quality and reliable brand should be selected when using wall fixing to ensure the construction effect and service life. In the process of construction, attention should be paid to prevent the wall from leaking to the ground or other places to avoid pollution.