Before it rained, the floor tiles were full of water.

Before it rained, the floor tiles were full of water.

Before it rained, the floor tiles were full of water. When we decorate the house, the decoration of the floor is very important. If the construction is not standardized or the materials are not in place, there will be many headaches in the later stage. The following points are believed to be water before it rains.

Before it rained, the floor tiles were full of water. What are the countermeasures for water accumulation on ceramic tile floor in rainy days?

1, which is a common resurgence situation. You can drag it on the ground with a dry mop for a few times to relieve the damp phenomenon.

Spread a carpet on the floor to let the water absorb, and then take it away to dry when the weather is dry.

3, usually must pay attention to open the window ventilation, close the doors and windows when it rains, to prevent outdoor moisture from entering.

What are the reasons for the resurgence of tiles?

1, related to the season, especially in our south, when it rains, tiles are particularly prone to moisture regain. Rainy weather, the temperature is relatively high, so the humidity is relatively high, which is easy to produce water droplets, but this phenomenon will disappear when the weather improves.

2. Regarding the ground treatment, the waterproof treatment of the foundation was not done well when the tiles were laid, or the purchased tiles did not absorb water, resulting in the formation of water vapor in the underground soil. The tiles are wet, which leads to high humidity in the room. This situation is troublesome to deal with, and it is necessary to deal with the waterproof problem of foundation again.

3. The ventilation effect is not good, and there is water leakage in the room, which leads to the resurgence of tiles.

How to prevent tiles from foaming

1. When choosing tiles, you must choose tiles with high water absorption. You can pour water on the back of the tile. If the water expands quickly, it means that it does not absorb water, so it is not recommended to buy them.

When the weather is good, you must ventilate more to make the air at home drier.

3, you can put some desiccant or activated carbon in the corner of your home, so that you can absorb indoor moisture.

Before it rained, the floor tiles were full of water. 2. When it rains, the tiles at home are exposed to the water.

The description is too general, but according to the description of the problem, it can be explained in the following three situations: the wall tiles at home will produce water in rainy days; On rainy days, the floor tiles at home will fall out;

On rainy days, there will be small drops of water on the surface of wall tiles and floor tiles at home. In the final analysis, the reason why these three kinds of rain will make the tiles in the house come out is that the external wall waterproof and storm drain are not done well, the ground waterproof is not done in place, and the home has not responded well when it comes to wet weather.

As long as these locations are checked one by one and carefully handled, it can be guaranteed that there is no fresh water at home in rainy days and home life will return to normal.

Solutions to the problem that ceramic tiles will leave the house in rainy days.

Different methods should be adopted to solve the problem of ceramic tile water leakage in different situations and locations. Only in this way can the right medicine be applied to solve the problem completely.

1. Exterior wall waterproofing and rainwater pipes are not done well.

If it is because the external wall is not done well, when it rains, the rain will penetrate the external wall and enter the tile, and then the water will flow out from the surface of the tile.

Therefore, it is very common for tiles to be short of water for this reason, especially for those cases where the construction quality of external walls of houses is unqualified. As long as it rains, when a large number of outdoor rainwater pipes concentrate on drainage, the tiles at home will be short of water.

Solution: When dealing with the situation that there is no water in the tiles in the house because the external wall is not finished in rainy days, the outdoor rainwater pipe and the external wall should be handled well, so as to completely solve the problem and ensure that this problem will not occur in the future.

Specific operation: please ask the person who specializes in external wall treatment to check whether the rainwater pipe in the water outlet part of the wall is disconnected and whether the outdoor part of the residential building leaks. It is very simple to check, because after the rainwater pipe is disconnected and leaked, the part below the leakage point will change color, which is obvious.

Then, firstly, the disjointed position of the storm drain pipe is repaired to ensure that this position will never leak again. After the rainwater pipeline is repaired, external wall insulation treatment and external wall waterproofing treatment should be done at the leaking wall.

In this way, the external wall part will not leak water, and there will be no problem in the natural room. Through this solution, when it rains, the tiles at home will not be short of water, and home life will return to normal.

2. Make the ground waterproof.

For the house on the first floor, if there is no overhead floor and garage design below, water will easily accumulate on the ground and wall tiles when it rains, and this situation will not return to waterless state until one or two days after it rains.

The reason why this happens is that the basement of the house is in a relatively low-lying position, and rainwater accumulates in the low-lying place, and then the waterproofing is not done well, so that the tiles are out of water.

Solution: It is very troublesome to solve the problem of tile leakage caused by water accumulation in low-lying areas of the house, because such a situation must be dealt with in a targeted manner before decoration.

Now that the tiles have been laid, there are some treatment methods, which are more expensive to handle. When solving the problem, it is necessary to waterproof the ground again, or raise the ground and make a hollow layer to deal with it.

Specific operation: Dismantle the tiles with the floor and wall surface not less than 30cm, then level them with cement mortar, waterproof the leveled positions with waterproof cloth, finally resurface the walls and floor tiles, and finally use them with dehumidifier, so that there will be no water on the tile surface in rainy days, and there will be no moisture after using dehumidifier.

If you don't want to dismantle the floor tiles, you can also raise them directly on the ground to make a hollow layer, which can also solve the problem of floor tiles coming out of water. When the floor of the hollow building rises, the bottom waterproof still needs to be done. It can be said that waterproof construction is very important.

3. I went back to the south and encountered rainy weather, and I didn't do well at home.

If the house is located in a southern city, and it is in humid weather and rainy weather, then the tiles in all parts of the house will have condensation, which can also be called tile water.

This kind of situation will be encountered in humid weather in southern cities, but it will not happen again as long as it passes through humid weather. The solution that requires more energy resources is carried out.

Solution: If it rains again in the humid weather in the south, then it is necessary to make rational use of the window opening and closing, and at the same time cooperate with the dehumidifier, so as to solve the problem that the tiles can't get out in rainy days.

Specific operation: when returning to the south in wet weather, in the weather without rain, only open the window for half an hour to breathe at noon every day, close the window at other times, and then dehumidify the room all day with a dehumidifier, so that there will be no water on the surface of the tile;

If the weather returns to the south and it rains indoors, you only need to open the window a little in the morning, ventilate it for half an hour, then close the window all day, and at the same time, cooperate with the dehumidifier, the surface of the tile will not get water and keep dry.

abstract

For the situation that ceramic tiles come out in rainy days at home, we must first determine the reasons, and then completely solve them according to the reasons. According to the general description, the reason for this situation is that the exterior wall is waterproof and the outdoor rainwater pipeline is the most likely.

So we can focus on the investigation here, and then solve its problems, so that the tiles at home will no longer come out in rainy days, and the home life will return to normal.

Before it rained, the floor tiles were full of water. In summer, the tile floor is full of water.

1, the tile floor is full of water, which is a normal phenomenon, mainly because the living area is relatively humid. On cloudy days, water droplets ooze from the floor, but not from the floor. On cloudy days, the air is humid and the temperature becomes lower, while the temperature of the ground (soil) is higher than the air temperature. When the water in the air touches the floor, it will form water droplets, which will lead to the phenomenon of water seepage of tiles.

2. In summer, the tile floor is full of water, and the principle is just the opposite. The ground (soil) and air are exposed to the sun at the same time. At noon, the temperature difference is not big, but when the fan is turned on, the ground temperature is higher than the air temperature, which makes the water on the surface evaporate and contact with the air on the floor to form water droplets.

In addition to this natural phenomenon, we have to consider whether some objective factors caused the tile floor to be full of water in summer. For example, if the water pipe breaks and causes water seepage, it is necessary to first hold the water pipe down, find out the leaking place, and then replace it with a new water pipe. For example, in the bathroom or kitchen, this phenomenon is caused by water accumulation on the ground, so it is necessary to wipe the ground in time to avoid slipping.

How to completely solve the moisture regain of floor tiles

1, keep the windows ventilated.

Generally, water drops will appear when the floor tiles regain moisture, basically because the weather is too humid. At this time, it is necessary to keep the windows ventilated, ensure that the room is always in a breathable state, and let the moisture in the room flow out, which can solve the resurgence of floor tiles to some extent.

2, quicklime

Lime can be used to remove indoor moisture, thus reducing the probability of floor tile moisture regain. The specific method is to buy 10- 15 kg of quicklime, put it in a container, cover it and put it under the bed or in the corner of the house. When the floor tiles regain moisture, you can close the doors and windows and open the container, so that the quicklime can absorb the moisture in the air, which is conducive to ensuring indoor dryness.

3, silicone waterproofing agent

Brick walls with wet water seepage should be coated with silicone waterproofing agent, which can not only prevent moisture from entering, but also make the wall breathable. If possible, you can spray moisture-proof liquid on the wall to form a moisture-proof layer. This method works well once and for all, but the disadvantage is that it costs a lot.