Installation analysis of crystal lamp chandelier

Installing the lamp seems simple. You can change the light bulb yourself, but it's not so easy compared with the crystal chandelier. Because the accessories of crystal lamps are numerous and complicated, it is still necessary to find a professional master to install them. The following introduces the installation analysis of crystal lamp chandelier and how to install it.

Stamping fixation

Perforation ensures that the crystal lamp is firmly fixed on the ceiling, and professional tools must be used to perforate the ceiling in advance. The specific number of holes to be drilled depends on the crystal lamp actually installed. When you make a hole, the building will fall down. In order to avoid accidents, it is usually safer for operators to wear goggles.

Fixed lamp

After the fixing holes are made, you can start to fix the crystal lamp on the ceiling and fix it with screws. In the process of fixing the crystal lamp, we should also pay attention to connecting all the lines. Because if you just fix the lamp and don't connect the line, then the crystal lamp is just a decoration.

Mounting fittings

The structure of installing accessories crystal lamps is usually complicated, and there are many accessories. The more expensive and luxurious the crystal is, the more accessories there are, and the installation is very time-consuming. In the process of installation, check the accessories in advance to ensure that no accessories are missed, and then install them carefully.

Switch debugging

After the crystal lamp is installed, you can turn on the switch to adjust the crystal lamp. Usually, the color and color temperature of crystal lamps can be changed by switching on and off for many times, so don't just press the switch once. Instead, you need to close the switch several times to see if there is any problem in installation.

Remote debugging

Nowadays, many crystal lamps on the market can be controlled not only by the switch panel on the wall, but also by the remote controller, but the remote controller needs to be matched with the lamp. We can match it ourselves or let Master An Deng match it. After matching, you need to debug the crystal lamp like a switch panel.