Minutes of monthly meeting of safety production in June

Minutes of monthly meeting of safety production in June

In June, the monthly meeting on production safety was held, and relevant personnel were required to urge the rectification to effectively prevent the occurrence of serious accidents. The following is the summary of the June Safety Production Month meeting that I carefully arranged for you. Welcome to reading.

Minutes of June Safety Production Month Meeting-Meeting Place: * * *

Participants:

Recorder: * * * *

Absence meeting:

In order to do a good job in the company's safety production, a training meeting on safety production of * * * * Co., Ltd. was held in the conference room on the second floor of the base on the afternoon of June 10. All employees of the Ministry of Safety attended the safety production training meeting. This training will be presided over by Zhang Kuo, deputy manager.

First of all, * * * reviewed the company's achievements in safety production in June, and achieved good results without accidents in August. Therefore, the company verbally praised the safety production department, hoping that all employees of the safety production department will make persistent efforts to achieve such results in September and add another brilliant stroke to the company's safety production. However, achievements are the past and do not represent the future. Therefore, we should tighten the string of safety, continue to strengthen the supervision and inspection of the company's safety production, and continue to work hard to achieve such good results in September. In order to continue to strengthen the safety awareness of employees of the Ministry of Security, special training was conducted. The training content is as follows:

1, safety clause

(1) Safe production: eliminate or control the dangerous factors in the production process to ensure the smooth production.

(2) Intrinsic safety: the production equipment or production system itself is equipped by means of design.

Safety, even in the case of misoperation or failure, will not cause accidents.

(3) Safety management: it is a series of legal measures to protect workers' safety and health, improve working conditions, prevent industrial accidents and occupational hazards, realize the combination of work and rest, strengthen safety production, and enable workers to carry out production safely and smoothly.

(4) Accidents: The general term for emergencies that occur in the course of professional activities, which usually interrupt normal activities and cause casualties or property losses.

(5) Accident hidden danger: the dangerous state of the things that caused the accident, the unsafe behavior of people and the treatment defects.

(6) Unsafe behaviors: employees violate disciplines, operating rules and methods and other dangerous behaviors in professional activities.

(7) Illegal command: the act of forcing employees to work in violation of national laws, regulations, rules and regulations or operating procedures.

(8) Illegal operation: employees do not abide by rules and regulations and take risks in their operations.

(9) The principle of "four don't let go": it means that when investigating and handling industrial accidents, we must insist that the cause of the accident is unclear, the preventive measures are not practical, the person responsible for the accident will not let go without punishment, and the employees will not let go without education.

(10) Three violations: illegal command, illegal operation and violation of discipline.

(1 1) Three-level safety education: factory education, workshop education and team education.

(12) Four Don't hurt: Don't hurt yourself, don't hurt others, don't be hurt by others, and help others not to be hurt.

(13) understand three things and four things: understand the production principle, technological process and equipment structure; Able to operate, maintain, troubleshoot and handle accidents, and correctly use elimination equipment and prevention.

protective equipment

Safe production? Four musts? ：

1. Everyone must pay attention to safety: not only their own safety, but also the safety risks of others.

2. Pay attention to safety in everything: pay attention to safety in everything, and don't ignore safety because of proficiency.

3. Always pay attention to safety: speed up because you are about to get off work, illegally manipulate and ignore safety.

You must pay attention to safety everywhere: you should pay attention to safety everywhere.

(14) occupational safety: refers to the state in which no casualties, occupational diseases, equipment damage or property losses occur in the production process, with specific meanings and categories? Is it safe? .

(15) Danger: refers to the existence or latent state that can lead to accidents.

(16) Hazardous chemicals: refer to chemicals that are flammable, explosive, toxic, harmful and corrosive, and will cause harm or damage to employees, facilities and the environment, including explosives, compressed gas and liquefied gas, flammable liquids, flammable solids, natural articles and flammable materials when wet, oxidants and organic oxides, drugs and corrosive products.

(17) Major hazards: refers to the long-term or temporary unsafe state of production, processing, handling, use or storage, unsafe behavior of people, defects in working environment and defects in treatment.

2. Safety colors and safety signs

China stipulates that red, blue, yellow and green are safe colors. Its meaning: red: forbidden, stop.

Blue: indicates the rules that must be followed.

Yellow: warning, attention

Green: indicates safe passage.

Illegal operation: Any violation of various laws and regulations issued by the state in the production process, and various rules and regulations formulated by enterprises and institutions and their superior governance organs that reflect the objective laws of production safety, including procedures, rules, articles of association, provisions, methods and delivery of technology, production operation, labor protection and safety governance, as well as notices and decisions related to production safety, are illegal operations.

The main contents are summarized as follows:

1. Don't wear and use all kinds of labor protection articles correctly according to regulations, and wear slippers, sandals, high heels, skirts, bell bottoms, scarves, girdles, braids, topless and backless, etc. In the production process.

2. Irresponsible work, leaving the post without authorization, drinking alcohol during working hours, doing private affairs, and engaging in activities unrelated to their jobs.

3, found that the equipment or safety protection device is defective, not to reflect to the leadership, continue to manipulate, unauthorized removal of safety protection devices and abandoned.

4. Ignore safety and warnings, venture into dangerous areas and places, climb or sit in unsafe positions.

5. Do not operate the equipment according to the operating rules and process requirements, operate the equipment by hand instead of tools without authorization, replace hand tools by hand, remove chips by hand, fix the equipment without fixture, and process the workpiece by hand.

6. Unauthorized use of equipment and vehicles that have not been accepted, handed over or sealed, and unauthorized use of equipment and vehicles operated by non-leaders.

?

Minutes of monthly meeting of safety production in June 2 1. The meeting fully affirmed the company's achievements in safety production in March.

With the joint efforts of all cadres and employees, the company's production safety situation in March was good. In March, there were no major and above accidents in the company's system, and no personal injury or death accidents occurred. As of March 28th, 20xx, the company has been operating safely for 7249 days. Power transmission, transformers, 10KV and low-voltage equipment are generally running well. 10 kv first-class obstacle 1 time, 7 times less than last year (8 times), and more than 2 times of power line failures of 35kV and above. In March, the maximum load of Jinghai Power Grid was 836MW, a year-on-year increase of 10.9%. This month, 35kV and above lines were charged twice, and 10kV lines were charged 36 times. This month, the equipment of the system station was overhauled 27 times, among which 8 defects need to be dealt with. This month, the company's leaders tracked 36 person-times on site and found violations 13 times, all of which were rectified on site, and the company's various on-site operation behaviors were further standardized. The safety supervision department of the municipal company praised the installation site of Chen Guantun's household meter.

2. Send the electrician area and Tangguantun Institute to make a special report on how to do well the Lvguantun outgoing line project and the Ma Xinzhuang line cut-over reconstruction project.

Send the electrician area to organize relevant construction teams to hold a special meeting, educate them on safety knowledge and disclose dangerous points, and sign a safety agreement with them, so that they can fundamentally realize the importance of safe construction; Second, cooperate with the functional departments of the company to carefully examine the construction plan and three measures of the project, supplement the missing items and omissions in the plan and three measures in detail, comprehensively describe the possible safety hazards in the project, and formulate preventive measures in a targeted manner; The third is to arrange a special car to comprehensively supervise and guide the implementation progress of the project, and solve different problems in different periods one by one to ensure that hidden dangers are discovered and eliminated in the first time; Fourth, organize all cadres and workers in the work area to understand the implementation progress, implementation content and safety measures of the project, so that every worker can know fairly well. At the same time, each construction site is carefully surveyed to eliminate all kinds of blind spots in construction and ensure the smooth completion of the project.

Tang Guantun Institute set up a leading group for Ma Xinzhuang railway line cutting and reconstruction, carefully analyzed all aspects of the project, determined the key hazard points of the project, defined the responsibilities, and established? Two groups and one control? Working group. ? Two groups? Namely, the preparatory group and the inspection group. A control? That is, the safety supervision team, starting from the details, made steady progress. According to the design scheme, in order to further ensure that there are no loopholes in line cutting and transformation, the institute has taken many line surveys and field surveys, and has a thorough knowledge of the line environment, and has formed a written cutting and transformation scheme to ensure that many small branches of 1 1 line can be cut and transformed without personal injury and line equipment damage accidents. The leading group of line cutting and line changing entered the construction site, taking strengthening the safety management of the construction site as the key point to control the occurrence of construction accidents. Strictly implement the contact system of working ticket, operation ticket and stopping power transmission, focusing on putting an end to habitual violations, inadequate supervision, and violations of operating procedures in near-power or live-line operations. Strengthen the supervision and inspection of construction personnel and improve their awareness of self-protection. 1-2 The person in charge of construction and relevant personnel shall enter the site in advance to explain the construction contents and matters needing attention, earnestly implement the on-site investigation system, do a good job in the pre-construction meeting, and analyze the hazards and construction steps. In the process of site construction, strictly fill in the ticket before work, sing the ticket at work site, and carefully verify the safety organization measures and technical measures to ensure the safe and smooth completion of this project.

Three. The meeting made arrangements for the company's safety production work in June and put forward clear requirements.

1, continue to promote the safety of the company's leading cadres, production departments and office managers, and arrange on-site inspections by vice presidents and leaders above the production department. In June, the focus of the site was on the spring maintenance site and the small site of household table replacement. Please report to the site in the safety supervision system in time every Thursday for arrangement. At the same time, infrastructure projects were put into production on a large scale in June, and there were many abnormal ways in the power grid. All engineering management departments are requested to strengthen on-site control to ensure the smooth production of various projects.

2. Strengthen the control of safety evaluation and rectification work, and the safety supervision department will organize relevant units to further promote the implementation of various rectification measures to ensure that the rectification work is completed on schedule.

3. It is also the peak time for birds to build nests. All units should continue to strengthen the protection of power facilities, play the role of line guards, do a good job in line inspections, and effectively reduce the occurrence of various accidents and first-class obstacles.

The power grid load will continue to increase further in April and June. According to the annual load curve, there will be a load peak in June every year, even exceeding the level in May and June. In June this year, the load is bound to hit a new record high, which will put great pressure on the safe operation of power grid equipment. All operating departments should do a good job in equipment inspection and hidden danger investigation, eliminate defects in time and nip in the bud. The centralized control station should strictly implement the reactive power and voltage adjustment curve in the second quarter, actively switch capacitors, and adjust the main transformer separately in time to ensure the reactive power balance and voltage stability of the power grid.

5. LV/LV outgoing line project of 220kV station in Lvguantun will be started one after another, and relevant units should cooperate with the functional departments of the company to do all the work before commissioning.

6. Focus on checking the customers of major harmonic sources, and issue rectification notices to users with harmonics. In June, the marketing department took the lead in carrying out key inspections including Zexiang Copper, Qunxin Iron and Steel, Taifeng Iron and Steel, Boxing Station, Hengxing Station, Shuntian Station and Fulaiya Station: mainly checking the operation of the control devices and whether they are in good condition, so as to avoid the failure of the control devices due to customers' failure to put into operation or device damage, which will endanger the safe operation of the power grid.

7. Do a good job in site safety and project quality control of Lvguantun and Ma Xinzhuang New Outlets projects. Please ask Tangguantun Power Supply Bureau to carry out the construction site acceptance in strict accordance with the requirements of the acceptance work instruction, strictly control the construction quality and ensure the equipment? Zero defect? Handover operation.

8. In view of the comprehensive overhaul site of Dongbaitou on June 2 1 June, the overhaul work area and the operation work area are requested to prepare the overhaul work instruction in advance and submit it to the Biotechnology Department for review, and make overall arrangements for overhaul, and make a plan for the renovation of the 5-bus 35KV switchgear in advance, and complete the plan review before the end of this month to ensure the smooth progress of all the renovation and comprehensive overhaul work.

9. During the thunderstorm season, please ask all relevant units to do a good job in lightning protection of power transmission and distribution equipment and information room.

4. Zhang Baofu, Deputy General Manager, gave important instructions on the recent work:

The power grid load of our company has been rising continuously recently. It is estimated that the maximum load of our company will be 950,000 kilowatts this year. It is expected that our company will enter the management mode of high voltage large power grid ahead of schedule, especially with the continuous growth of load, transformer overload and heavy load line operation appear in local weak links of power grid. Power transmission and distribution majors should do a good job in equipment maintenance, and relevant operation management departments should attach great importance to it.

In April, the company entered the peak period of construction, and the construction of Lvguantun, Ma Xinzhuang outgoing line project, smart grid project and smart home meter installation project were all concentrated in this month. All functional departments should actively organize and coordinate projects. In view of the household meter installation project, all business offices should carefully organize and arrange, strengthen on-site safety control, require relevant departments to do a good job in project organization and coordination, implement the system of leading cadres in place and the system of grass-roots unit leaders in place, increase the safety supervision on the construction site, and resolutely put an end to the safety production problems in small construction sites.

All units should do a good job in the construction and transformation of overhaul and technical transformation projects, and require the competent departments of development, biotechnology and dispatching to create a relatively relaxed working environment for grass-roots units. At present, municipal projects are in full swing, and birds build nests. Please strengthen the management of the transmission work area and various business units, give full play to the patrol function of the line patrol team, and ensure the safety and stability of the power grid.

?

Minutes of monthly meeting of safety production in June III. June 26th this year is Safety Day, and all departments raise awareness and enhance their responsibilities. It is necessary to conduct regular and comprehensive inspections and find problems in time; It is necessary to promptly urge rectification and eliminate hidden dangers; Strengthen cooperation, grasp the management of * * *, do a good job in current safety work, and create a safe, stable and harmonious hospital.

Meeting requirements:

All departments should strictly follow the deployment and requirements of safety production work, and combine the actual work and the scope of responsibility to earnestly and solidly grasp the current safety production work.

1, strengthen publicity and training.

It is necessary to carry out publicity, education and training on safety laws, regulations and policies in combination with the safety production month activities, and establish? Production must be safe, and safety can produce? 、? Safety is the greatest benefit? Consciousness, firmly establish the concept that development is the first priority and safety is the first responsibility, attach importance to safety production, and consciously grasp safety production in action.

2, strengthen the responsibility, clear work objectives, pay close attention to the implementation of the responsibility system for production safety.

All departments have signed the responsibility book for production safety objectives, and implemented the responsibility system for production safety layer by layer, so that the responsibilities are clear, the responsibilities are assigned to people, and the responsibilities are strictly managed.

3, we should continue to in-depth investigation and management of hidden dangers, pay special attention to the key supervision of production safety.

(1) Three requirements: First, carefully investigate hidden dangers and leave no blind spots and dead ends; Second, the responsibility, measures, funds, time limit and implementation of the fifth plan for the rectification of hidden dangers; The third is to establish and improve the classification management mechanism of major hidden dangers and consolidate the results of hidden dangers management.

(2) Intensify the investigation of safety accidents, investigate and deal with serious accidents, strictly investigate the responsibilities, and earnestly implement the safety responsibility system. According to the accident? Four don't let go? If the reason is unclear, the responsible person can't handle it, the workers can't get education, and we should not let it go without the principle of preventive measures.

(three) focus on deepening the special rectification work of production safety. The safety production team will regularly carry out special rectification work for safety production, and carry out various special rectification activities such as road traffic safety, dangerous chemicals safety, boiler and pressure vessel safety, fire safety and medical safety.

4. Strengthen the reporting system for responsibility implementation.

? ;