What are the advantages and disadvantages of radiator installation methods?

Radiator is a kind of radiator mainly for heating, which has a unique charm as a heating device in modern life. How to install the radiator? Today, let's follow Jin Jin to learn about four radiator installation methods and their advantages and disadvantages.

Keywords: advantages and disadvantages of radiator installation methods

Connection methods have their own advantages and disadvantages:

First, the single tube series bypass method and its advantages and disadvantages

Single-tube series bypass mode not only inherits the advantages of saving pipeline in single-tube series connection, but also effectively solves the disadvantage that all radiators in single-tube series connection cannot be controlled independently. The solution is to add a three-way valve and a connecting pipe to the water inlet pipe at the front end of the radiator, which is directly connected to the water outlet pipe of the radiator. Under normal circumstances, the water flows directly through the radiator. When it fails, turn the valve to bypass the water and flow directly to the outlet pipe of the radiator. By adjusting the three-way valve, the water flow through the radiator can be changed, so as to achieve the purpose of adjusting the temperature.

Second, the single tube series method and its advantages and disadvantages

Single-pipe series connection method is an economical way and an ancient way to save pipelines. However, there is a serious disadvantage in this way of walking, that is, his waterway can only flow to the next radiator after passing through the front radiator, and the hot water from the back radiator will pass through all the front radiators, which will cause the radiator at the end to have insufficient temperature. The radiator at the front end is blocked or the valve is broken, and the back one can't be used. This method was widely used in the 1970s, and now it has been basically eliminated, and this connection method is rarely used.

Third, the fan cooling method and its advantages and disadvantages

The fan-shaped radiation mode is characterized by installing a water separator, and each group of radiators is supplied to return pipe separately, which realizes centralized and independent control like floor heating and facilitates temperature adjustment. The pipe at the door of the radiator can be buried in the dark, ok. However, due to the need for a separate loop when installing each group of radiators, the pipeline consumption is large and the installation cost is high, which is unacceptable to most customers at present.

Four, parallel method and its advantages and disadvantages

At present, parallel installation of radiators is a widely used installation method, which inherits the advantages of independent control and beautiful appearance of the above methods. The use of pipes is less than that of fan radiation method, but more than that of single pipe series method, which is of course acceptable to most customers. Although there are many ways to install radiators, users must not modify them privately. Because there may be no original construction drawings and strong professionalism, it is difficult to ensure that there is no problem in water pipe docking. Once the water leaks, the consequences are unimaginable. Under the guidance of professionals, you can change, but don't move easily. Before home improvement, you should consider the items that need to be installed.

Installation position of radiator:

First, the principle of low should not be high. According to the air principle, hot air rises and cold air sinks. The higher the radiator is installed, the greater the heat loss. Because heat is radiated from the radiator, we should consider both convection and heating cold air when choosing the location. In general, the radiator should be installed under the window sill, because the radiator is close to the ground, which can not only make indoor air convection and maintain the balance of room temperature, but also heat the air drilled from the window gap, thus playing a role in preventing cold.

Second, the principle of priority under the window The installation position of the radiator under the window does not affect the placement of furniture, but it can effectively block the discomfort caused by the entry of cold air. But the specific installation location should also consider the specific pattern of the customer's home. Radiators are available in different heights and models to meet different needs.

Precautions for installation When installing the radiator, you should pay attention to the following three points:

1. When we plan to install radiators, the first thing to do is where we need to install radiators, where the heating effect is good, where the installation is beautiful, and of course, where the safety performance is good.

2. In the process of installing radiator, the key is safety and air tightness. Pay special attention not to leak water. From another angle, that is, the difficulty of construction, unless there are special circumstances, don't change the position of the radiator at will. If so, it will not only bring inconvenience to yourself, but also bring inconvenience to others and neighbors.

3. In the later stage, that is, after the radiator is installed, it is necessary to conduct inspection and acceptance. For example, after the radiator is installed, testing is indispensable. Usually, when replacing the construction, the master worker will reserve a valve on the pipeline, and after installation, a stamping test will be carried out. Ensure that there is no water leakage, no dripping, no bubbling, no running water, and there will be no problems in the installation of the radiator, and then complete the test and acceptance of the radiator.