Can I put the gasoline in the car sideways to take it away?

Gasoline can't be taken away in the car sideways.

Gas cylinders must be placed vertically and transported for a short distance. It is impossible for almost all cars to put the fuel tank vertically. The SUV can, but it must be fixed, and the fuel tank can't shake and collide in the trunk.

The fuel tank can't be put in the carriage, which belongs to mixed passenger and cargo. It needs to be clear that passenger cars are not allowed to carry goods except the built-in suitcase and the luggage rack outside the car body. Gas tanks are dangerous goods, and once an accident occurs during transportation, the consequences are unimaginable. If it is hot weather in summer and the temperature inside the car is very high, the fuel tank inside the car is simply an "untimely bomb".

Matters needing attention in gas tank transportation

1. Overfilling is strictly prohibited to prevent cylinders from being heated.

2. Compressed gas and liquefied gas are not allowed to leak, not only because they are highly toxic and flammable, but also because some gases will react with each other to cause explosion. Therefore, cylinders with conflicting contents should be stored in different warehouses.

For example, hydrogen bottles and liquid chlorine bottles, hydrogen bottles and oxygen bottles, liquid chlorine bottles and liquid ammonia bottles are not allowed to be mixed in one room. Combustible gas shall not be stored with other kinds of dangerous chemicals. In addition, the gas cylinders should be placed upright and tidy, and it is best to enclose and fix them with a frame or fence, and leave a passage.

3. Combustible substances such as grease are easy to catch fire or even explode under the impact of high-pressure pure oxygen. Therefore, it is forbidden to contact oxygen cylinders with grease. If the cylinder is contaminated with grease, it should be wiped clean with carbon tetrachloride immediately.

4, the warehouse should be cool and ventilated, away from the heat source, fire source, prevent the sun exposure, it is forbidden to heat. Explosion-proof lighting should be used for warehouse lighting. Flammable materials shall not be piled up around the warehouse.

5, cylinder warehousing acceptance should pay attention to the packaging shape without obvious trauma; Complete accessories; Closed tightly, no air leakage; It is not allowed to extend the service beyond the service period.

6. Handle with care when loading and unloading. It is forbidden to collide, throw, slide or roll sideways on the ground. Don't aim the cylinder valve at people when handling, and pay attention to prevent the cylinder helmet from falling. When handling oxygen cylinders, work clothes and loading and unloading tools must not be stained with oil.

7, storage and transportation of steel cylinder valve should be fastened, shall not leak. If the gas cylinder leaks during storage, the warehouse door should be quickly opened for ventilation, the valve of the gas cylinder should be tightened, and the gas cylinder should be moved to a safe place immediately. If it is toxic gas, wear a gas mask. In case of fire, the cylinder should be removed from the fire site as soon as possible. If it cannot be transported, a large amount of water can be used to cool the cylinder to prevent the cylinder from exploding due to high temperature. Firefighters should stand against the wind and stand on the side of the cylinder.

8. Safety helmet must be worn when transporting gas cylinders. Generally, gas cylinders should be laid flat, with the bottle mouths facing the same direction and not crossed; The height shall not exceed the vehicle guardrail, and it shall be fastened with triangular wooden mats to prevent rolling.

9. In order to distinguish the gas filled in cylinders, the relevant state departments have uniformly stipulated the marks of cylinders, including the outer surface color of cylinders, the characters used and the colors of characters, etc. , should be implemented in accordance with the provisions.

10, all kinds of gas cylinders must be in strict accordance with the provisions of the state, regular technical inspection. If serious corrosion or other serious damage is found in the use of gas cylinders, they should be inspected in advance.