How long does it take for the AB glue to solidify after being stained?

At room temperature (25°C), AB glue can be positioned after being fixed for 5-10 minutes. It can reach 50% of the maximum strength after 30 minutes of lamination, and reach the maximum strength after 24 hours.

One of the AB glues is the original glue and the other is the hardener. The two can be hardened by mixing them. They do not need to be hardened by temperature. The heat deformation temperature of the hardened body after hardening is 60°C. It will lose its adhesive strength when it reaches 90°C, but it will not become embrittled and lose its adhesive strength in the cold winter at -10°C.

Extended information

Precautions for using AB glue

1. Keep the workplace ventilated and avoid contact with children.

2. Please wear isolation gloves when operating. If it touches your skin or eyes, rinse with clean water or seek medical advice immediately.

3. Do not mix the two glues when not in use, and do not cover the wrong glue cap after use.

4. Only by ensuring the correct mixing ratio can ideal mechanical and chemical properties be obtained, otherwise it will lead to unsatisfactory curing effects.

5. The construction temperature should not be lower than 5℃. Appropriate heating in winter can speed up the curing speed and improve the bonding strength.

6. The amount of glue added should not be too much, and the construction must be completed within the working time; the more glue added, the higher the temperature, and the shorter the usable time.

7. If the glue appears to be too sticky or gelled, please stop using it.

8. Store in a cool, dry, ventilated place and away from high temperatures.

9. When using in batches, please do a test first to avoid affecting the bonding effect due to improper operation.

Baidu Encyclopedia--Brothers are good at glue

Baidu Encyclopedia--AB glue