When is the best time to sew tiles for home decoration?

1. First construction time of caulking agent: after the wall tiles are laid.

1. Node analysis of the first construction time of the caulking agent: Why is it said that the first construction time of the caulking agent is after the wall tiles are laid? This is mainly because many renovations now choose to have floor tile construction. Wall tiles and floor tiles are not completed at one time, but are constructed in two different stages. Usually, the bricklayer will lay wall tiles in the early stage, and the bricklayer will lay floor tiles only after the wall is completely exposed for the first time. So we can use this time to make beautiful joints on the wall first, which is a reasonable use of time and a reasonable arrangement for the construction of various types of work.

2. The content of the first construction time of the caulking agent: The first construction of the caulking agent only makes the caulking agent on the wall. Note that not all the walls are covered. The first row of wall tiles only next to the ground should be made without beautiful seams, because this row of wall tiles will be affected by the laying of floor tiles, so it should be reserved. At the same time, the first joint construction is only to fill the gap with joints, and there is no need for construction such as eradication and cleaning.

Second construction time: After the floor tiles are laid.

1. Time node analysis of the secondary construction of the seamless pipe: The time node of the secondary construction of the seamless pipe is after all the floor tiles are laid, which is mainly because the bricklayer's work is completed at this time. After all the wall bricks and floor tiles are laid, the secondary construction of joint can be carried out at a suitable time without delaying the whole construction period and ensuring that the main materials in the later period can be installed in the site.

2. The content of the secondary construction time of the sealant: the secondary construction of the sealant has two parts. The first part is to make all the cracks in the tiles that were not made on the original wall; The second part is to do all the beautiful seams of all floor tiles well. After such joint construction, the joint of indoor tiles has been completely completed, but it does not mean that the joint is completely completed, because the closing work that needs to be done has not been done.

Third, the third construction time of the beautiful seam: after the decoration is completed, the ventilation is scattered.

1. Node analysis of the third construction time of the seamless pipe: After the second construction of the seamless pipe is completed, it is normal to install the main material immediately. At this time, there will be some damage to the beautiful seam, which is inevitable. At the same time, it is inevitable that some parts will be missed during the construction of the joint. Finally, a series of gaps will occur after the main material is installed, such as the gap between the cabinet countertop, the gap between the washbasin countertop, the gap between the toilet and the floor tile and so on. Therefore, the final finishing construction should be carried out under the condition that the house is ventilated and tasteless.

2. Contents of the third construction time of the sealant: The contents of the third construction of the sealant include two parts. The first part is to check the cracks between the original wall and floor tiles, and do a good job of the damaged and missing parts; The second part is to do a good job of all the gaps after the installation of the main material, including the gap between the sink and the stone countertop, the gap between the cabinet countertop and the tile, the gap between the washbasin countertop and the tile, the gap between the toilet and the tile, and so on. These are all done, and the construction of the beautiful seam is completed.