Paper and seal format for official documents? (thank you! )

1, official document paper: international standard A4 paper is adopted, and its finished product dimensions are: the width of the top white edge (20mm±0.5mm), the width of the bottom white edge (7 mm 0.5 mm), the width of the left white edge (binding) and the width of the right white edge (turning) on official document paper are 65433. Do not turn to the first page. In order to prevent the words "there is no text on this page", when adjusting the line spacing and word spacing, each page can be reduced by 1 line, each line can be reduced by 1-2 words, each page can be increased by 1-2 words, and each line can be increased by 1-2 words. Official documents should be printed on both sides. The page number of the official document is marked with Arabic numerals with a half-angle of No.4 in white and placed on the bottom line of the edition. A word line of No.4 is placed on the left and right of No.4, and the word line is 7mm away from the lower edge of the center of the board. Single page number occupies 1 word in the right space, and double page number occupies 1 word in the left space. Document binding is consistent with document typesetting, and pages cannot be bound on the left side.

2. Seal format: the seal is 2mm―4mm away from the text, and the date is printed in the center. When there is no text in the lower arc of the seal, the lower set method is adopted, that is, the lower arc is only pressed on the date of writing; When there are words under the seal, the middle set method is adopted, that is, the center line of the seal is pressed on the date of writing.