How does Yuba go up and down?

Yuba turns the button on the shower to turn it on and off.

Yuba should adjust the shower nozzle according to the height of the user when installing it. Surface mounted shower switch with concealed water pipes hot on the left and cold on the right, with the center spacing of 150 mm, the concealed water outlet on the wall surface should be flush with the ceramic tile surface, and the concealed water pipes inside should be vertical to the wall surface. After installation, the shower should be at a 90-degree angle with the wall.

In addition, the water pressure adjustment of the shower is also a key: in general, the water pressure within 1.5 kg is the most suitable for the shower. If the water pressure is too high, the shower will explode, and if the water pressure is too low, the shower cannot be used normally.

A well-designed shower head can ensure that the amount of water distributed by each shower head is basically the same, so the choice of shower head must be based on the water. Water-saving function is the key point to be considered when purchasing shower heads. Some showers adopt steel ball valve core and are equipped with hot water regulating controller, which can regulate the hot water to flow into the mixing tank and make the hot water flow out quickly and accurately. This reasonably designed sprinkler saves water by 50% compared with ordinary sprinklers.

Basic information:

Yuba comes from the English word "bath master", which can be literally translated as "bathroom owner". It is a small household appliance for bathing, which integrates the functions of bathroom heating, infrared physiotherapy, bathroom ventilation and decoration through the ingenious combination of special waterproof infrared heat wave tube and ventilator.