The installation method of luminous light bar is ingenious.

Light-emitting strips are generally LED strips, which are widely welcomed by customers because of their light weight, energy saving, softness and long service life. But after all, it is a new product, and many people have never really touched it, so they don't know much about its performance and installation method, let alone the color matching and light and shade when installed in the lamp trough. It is not easy to have a satisfactory effect after renovation. The following small series will sort out some for you.

I. Introduction of luminous light bar (LED light bar)

Light-emitting strip (LED strip) has the advantages of pure light color, bright color, high brightness, energy saving and environmental protection, long service life, safety and reliability, and is generally used in decoration industry. Problems such as waterproof grade, total power, power supply and controller need to be considered during installation. When light-emitting strips are used in interior decoration, the requirements for waterproof and ultraviolet protection are not high and the installation is relatively simple. At present, there are many popular line lights on the market, but there are two angles of light, one is spotlight and the other is astigmatism.

1, spotlight type

Features: Covered with a 30-degree condenser lens, the illumination distance is 3-5 meters, and the lamp beads are high-brightness 5050 wafer chips. DC24V, 48 beads. The light color is uniform, and the waterproof grade is higher than that of wall washing lamp, IP67.

Applicable buildings: shops, hotels, hotel doors, small advertising signs, dark buildings, bright outlines. Small and light, easy to install. As shown in the figure below:

2, astigmatism type

Features: The cover is 120 degrees, which means that the light emitted by the angular lens is scattered, but the light color is more uniform. Lighting distance1-2m, using 5050 high brightness wafer chip. DC24V, 48 beads. The light color is uniform, and the waterproof grade is higher than that of wall washing lamp, IP67.

Applicable buildings: shops, hotels, hotel doors, small advertising signs, dark buildings, bright outlines. Small and light, easy to install.

Second, the installation method of luminous light bar

1, using tools/raw materials

Tools: pliers, scissors, electrical tape

Raw materials: lamp strip, special clamp for lamp strip

2. Installation method/steps

(1) First, determine the length to be installed, and then take an integer to intercept.

Because this light band is a unit of 1 m, it will not affect the circuit only if it is cut off from the incision. If you cut it off at will, a unit will not light up.

For example, if a length of 7.5 meters is needed, the light strip will be cut 8 meters.

(2) Connect the plug

The LED itself is a diode, which is driven by direct current, so it has positive and negative poles. If the positive and negative poles are reversed, they will be in an insulated state and the light strip will not light up.

If the connecting plug is not energized, just remove the other end of the light strip.

(3) Placement of light strips

The light strip is packed in trays, and the newly removed light strip will be distorted and difficult to install. You can tidy it up first and put it in the light trough.

Because the light strip is single-sided, uneven placement will lead to uneven light and shade.

Generally, the back of each light-emitting strip is a unique adhesive double-sided tape. When installing, you can directly tear off the double-sided adhesive tape on the back of the light-emitting strip, and then fix the light-emitting strip on the previously designed route for a long time. The light-emitting strip is a circuit structure consisting of three light-emitting diodes connected in series and in parallel. Every three light-emitting diodes can be cut off, when it is long, it can be cut off, and when it is short, it can be welded. At present, there is also a clip on the market that can be directly used to install the lamp trough. The installation effect is quick and good. The above is the installation method of luminous light bars arranged by Bian Xiao for parents.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~