Introduction to bathroom decoration

Toilet is an important part of family decoration, and many details need to be paid attention to when decorating. This paper will provide strategies for bathroom decoration from ceiling, floor, wall, doors and windows, circuit laying, waterway reconstruction, sanitary ware installation, ventilation and greening.

Material selection

The toilet is full of water vapor, so high-quality materials with waterproof, anticorrosive and antirust properties should be selected during decoration to ensure service life and safety.

ground treatment

Be sure to waterproof before laying floor tiles. After the floor tile is paved, ensure that the surface has a drainage slope (about 1%), and the slope points to the floor drain. After the completion of tile laying, conduct a water-closing test for at least 24 hours. When laying floor tiles, pay attention to the alignment with the wall tiles to maintain the overall aesthetic feeling and avoid visual confusion.

Wall decoration

The tiles on the wall should not only be moisture-proof and waterproof, but also ensure a smooth fit. Wall tiles and floor tiles should be aligned to maintain a sense of integrity. If the outlet of the water pipe is on the wall, the incision should be small and appropriate, so that the flange can cover the incision and keep the appearance perfect.

Doors and windows design

It is best to have windows in the bathroom to facilitate ventilation. If there are no windows, the design of the door needs special attention. To prevent water from overflowing, the door frame should be higher than the interior of the bathroom. There is a gap between the door and the ground to facilitate return air. For sliding doors, a waterproof layer should be added between the door and the floor tile.

Circuit laying

Wire connectors need to be hung with tin and wrapped with waterproof tape and insulating tape to ensure safety. Wires need to be wrapped in flame retardant tubes. Switches and sockets should have moisture-proof boxes, and their positions should be determined according to the size and position of electrical appliances for easy use.

Waterway reconstruction

The water supply and drainage lines in the bathroom should be changed as little as possible. If it needs to be changed, it depends on the specific situation. For example, different washing machine models have different water supply and discharge positions.

Sanitary ware installation

Measure the distance between sewer holes in advance, and choose sanitary ware such as bathtub, toilet, toilet and washbasin according to the size to avoid inappropriate size during decoration. The toilet is sealed with toilet mud first, and then fixed with expansion screws or glass glue for easy maintenance.

ventilating device

The bathroom must be equipped with exhaust fans and reverse doors to prevent dirty air from flowing backwards.

greening decoration

The bathroom should not be a corner forgotten by green. When decorating, you can choose potted plants that are resistant to shade and like humidity and put them in the bathroom to add vitality here.