How to do the balloon arch?

To make a balloon arch, prepare the bracket first, and then tie the balloon. Here's how to make a balloon arch.

0 1 Brackets, ring buckles and balloons shall be prepared for the balloon arch.

Blow balloons one by one and tie a knot at last.

Take a ring buckle with four notches on it, put the knot of the balloon in the ring buckle, and put four balloons in one ring buckle. In this way, many balloons with four rings can be made.

Dismantle the bracket first, pass the bracket rod through the middle of the ring buckle, take four balloons as a layer, put the balloons on the bracket rod layer by layer until the bracket rod is full, and then connect the bracket rod with the base to complete the balloon arch.

Method 2:

The first step; Fixed rope

The second step; Fix the blown balloon on it.

The third step; Balloons of the same size are tied together with 3 (4) and fixed on the line, layer by layer.

The fourth step; At this time, you can find a pvc pipe as a bracket and bury it in the gap of the balloon.

The fifth step; Fixed; unchangeable

Make all kinds of arches and adjust the color and size of balloons according to your own needs. It's actually quite simple. It is important that the balloon should be symmetrical.

Method 3:

1. Blow balloons of the same size. Tie the blown balloons together, pink and pink, purple and purple.

2. Press the pink balloon pair and the purple balloon pair, and then wrap a pink ball and a purple ball around it.

3. Go around again.

4. This group of four balloons is completed, which is the basis of making balloon chain.

5. Prepare a long nylon rope or fishing line and wrap it around the hook (or door handle).

6. Put the balloon group on the rope from top to bottom, and then use the rope to bypass the pink ball and purple ball twice, so that the balloon is fixed.

7. Take out another balloon group, stagger it with the previous balloon group, hold it by hand, then wrap two balls in the two groups of balloons once with a rope, and then wrap two balls in the outer group twice.

8. If this goes on, it will be made into a balloon chain, which can be hung indoors and outdoors as decoration. If you make a balloon arch, it is usually 5 meters long.

9. Prepare an aluminum-plastic PVC pipe, which can be bent at will and pressed into the balloon chain.

10. Prepare a welding base. If there is no such base, it can also be made of cement. The specific method is: put some cement in a small round paint bucket with no bottom, and then insert a pipe into the cement. When it takes shape quickly, pull out the pipe, take off the bucket and let it dry naturally, which is a bit like making honeycomb briquette.