Steps to build movable aluminum alloy stage

The construction of the stage aluminum alloy truss for an opening celebration event can be divided into twelve steps. The specific manufacturing process is as follows:

First, set four bases at general positions on the ground, and adjust the supporting legs below to make it a horizontal plane.

Second, the outer side of the base penetrates the lower part of the diagonal support at the four corners, inserting two to eight in each part.

Third, use screws to fix the anti-head on the base. The rotation direction of the anti-head should be the same as shown in the picture.

Fourth, place a square behind.

Fifth, connect the beams on the ground.

Sixth, the two ends of the beam are separated from each other, the two square sleeves at both ends are well connected, and the beam components are assembled on the ground at this time.

Seventh, connect the column trusses flatly, then screw one end to the middle of the back head and the other end to the cross bar. The gourd and the cross are connected together. The function of the hoist is to improve the beam trusses below.

Eighth, gradually put the columns and trusses together. Be careful not to push too hard on the post, then secure the screw on the opposite end.

Ninth, after the column is erected, the hook under the hanging hoist is hooked to the beam below through the hanging belt.

On the tenth day, four people gradually pulled up the crane and pulled the beam overhead.

Eleven, install lighting and sound equipment on the beams.

Twelve, four people pulled the crane to a predetermined height.

The aluminum alloy stage light stand is mainly composed of a base, an aluminum alloy truss, a reverse head, an oblique support, a square sleeve, a horizontal pole, and a hoist (hand-pulled or electric).

Stage lighting stand: mainly used to stabilize the entire shelf.

Stage Lighting Lens: Used to create greater height, reaching greater heights through the head.

Stage light frame diagonal brace: used to support the stability of the entire aluminum alloy truss system.

Stage light frame square cover: The height of the beam can be easily adjusted through the square cover.

Stage light frame crossbar: on the top of the truss, mainly on the sling hoist.

Stage light stand hoist: can be divided into two types: hand-operated and electric hoist, used to lift aluminum trusses.

Stage lighting frame sling: the connection between the lift and the aluminum alloy truss.

Shanghai Jiali Conference is mainly dedicated to: business performances,

exhibition meetings, various celebrations, and the service industry integrating large and medium-sized theatrical performance planning, and the scope of business is It includes professional stage construction, lighting, sound, and video system projects, the production of audio and visual lighting projects for mobile performances, the rental of audio-visual equipment, lighting and other equipment, exhibitions, groundbreaking celebrations, stage design, planning and execution, etc.

Jiali has been involved in conferences for more than 20 years and has cultivated professional management teams, planning teams, creative teams, design teams, project teams, media teams, execution teams, technical teams, engineering teams, etc., and has accumulated hundreds of thousands of employees. A successful planning and execution case, building up global social resources, industry expert resources, media resources, host resources, celebrity resources, performing arts resources, hotel resources, welcome resources, security services and other resources, exhibition equipment resources , as well as the hardware facilities and supporting service resources used in the exhibition.