Material and price of the balcony sliding door lock How to install the balcony sliding door lock?

Now more and more families are using sliding doors, such as balconies and kitchens. Especially in the sliding door of the balcony, it not only keeps off the cold, but also prevents thieves from entering. The balcony sliding door is flexible and decorative, so many families will use sliding doors. The sliding door lock can be pushed and pulled together, which is very convenient to use. However, there are many kinds of sliding door locks, so we should pay more attention when choosing them, so as not to affect the overall beauty of the room. So what material should I use when buying the balcony sliding door locks? What are the prices and installation methods of the balcony sliding door door locks?

1. What is the material of the sliding door lock?

The aluminum alloy sliding door lock adopts high strength and toughness spring, which can be effectively opened for 500 thousand times; Mechanical optimization design, smooth and noise-free opening and closing doors when in use; The linear handle is comfortable to hold and soft to touch. It is characterized by high impact resistance, corrosion resistance, moisture resistance and waterproof; The connection precision between the handle and the panel is high, which will not loosen even if it is used for a long time, so that you can use it with confidence and see it comfortably.

Second, the sliding door lock price range:

B-type 5586 frame glass lock sliding door lock ground lock sliding double-sided key sliding door hook lock? Reference price 25

Germany EKF Ikov Z-303BN wire drawing sliding door lock wire drawing sliding door lock wire drawing? Reference price 55

Three-ring movable door lock-movable door lock/movable door lock/sliding door lock Y2? d？ Reference price 49

Taihao copper lock cupboard door lock/bathroom balcony door lock sliding door lock/pure copper mobile door lock DM006? RG？ Reference price 185

5586B hook lock? Sliding door lock? Pull down the door lock. Hook lock? Reference price 25

Shi Liantai is a good bronze lock? European door lock? American bathroom hook lock? The balcony sliding door door lock in kitchen DM006 reference price 198

Third, how to install the sliding door lock?

Installation of the upper slideway: When installing the upper slideway, it must be fixed with the doorway beam or awning beam according to the requirements of the width and opening direction of the doorway. In general, when fixing the upper slideway in two parts based on the width center of the doorway, the following points should be noted: the left and right elevation of the joint between the slideway and the awning beam or the doorway beam is consistent, and the size of the slideway is consistent with the doorway center. The center line of the slideway is consistent with the painted exterior wall or brick wall, and its size is half the thickness of the door leaf plus a gap of 20mm? If it is a painted exterior wall, an additional 20mm package width is needed.

Door leaf installation: the door leaf and pulley system are processed and formed by the company in the workshop. Immediately after the installation of the upper slideway, put the pulleys in pairs into the slideway of the slideway, then transport the door leaf vertically below it by hand or other lifting tools, put the welding screws on the door leaf into the bolt holes on the pulleys, and temporarily fasten them with double nuts. Similarly, hang another door leaf first.

Door stop: after all doors are installed and adjusted, close and push the doors respectively. According to their positions, an angle steel stopper is welded at the bottom or inside of the upper slideway at a distance of 10mm from the pulley edge to limit the opening area of the door within its effective range. The contact between angle steel and pulley needs a hard rubber pad of not less than 20mm as a buffer.

Installation of guide block and under-door stop: The installation of guide block and under-door stop should be coordinated with civil engineering. The key is to locate the center line of the guide cake according to the actual position of the flat steel under the door leaf. The distance between the guide cake and the ground is10 ~15 mm. When positioning the lower limiter, push the door leaf to the position of 10~20mm away from the outside, and bury it in concrete, or fix it with expansion bolts after concrete construction.

For residents living in buildings, especially those living on the lower floors. Balcony is an extension of the interior of the building. In order to ensure indoor safety, it is very important to strengthen the security and anti-theft work of balcony. Sliding door locks are widely used by people. Installing a sliding door on the balcony can not only realize the combination of push and pull, but also be very convenient to use. In addition to push-pull combination, it must be safe. Therefore, it is very important to choose a the balcony sliding door lock with reasonable price. I believe Bian Xiao's answer above can help you!

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~