Traditional Culture Encyclopedia - Hotel accommodation - How to remove the double-sided adhesive from the car body?

How to remove the double-sided adhesive from the car body?

First, dip a clean towel or soft cloth in warm water or hot water (the principle is that the glue melts when heated), and rub and dip it several times at the sticky place to soften the sticky place. At this time, soak the towel in soap solution (or washing powder and detergent) and wipe it repeatedly where there is glue. Finally, wipe the soap bubbles with a warm wet towel, so that the glass is not only clean but also bright.

Second, there are many ways to remove it. You can try the following methods:

1, offset printing soap can be removed by adding a little mixture of ammonia water and turpentine.

2. Repeated pasting and tearing with transparent adhesive can remove part of the surface.

3. Wipe it off with a little dilute sodium water, or use paint thinner.

4, you can use a hair dryer to blow dry, and then gently scrape.

5. Wipe with a cotton swab dipped in nail polish remover.

Please use a special detergent. The name of this special detergent is "Gaote 128 Detergent", which is available in hotel shop. Price 70-80 yuan a bottle, 500g a pack.

Alternatively, transparent glue can be used. Usage: Tear off a small piece of transparent adhesive, stick the middle part on the residual double-sided adhesive, and scrape it clean with nails. Then, grab the two ends of the transparent adhesive tightly and tear it outward, and repeat it for 2 to 3 times, which can generally be done. The trick is to tear it quickly, forcefully and accurately.

Dip the toothbrush into the toothpaste brush. Don't push the toothbrush too hard, it will hurt the wall. The last remaining shallow marks can be erased with an eraser.

Use organic solvents, such as anhydrous ethanol, carbon tetrachloride, chloroform, etc. Wipe gently with a soft cloth. I bought it at the chemistry store. Very effective! But be careful that the paint on the pillar changes color. There are two ways:

1. If the wall skin is firm, use a stronger adhesive to remove it. Put it down slowly.

2, wind oil essence. Wait a while after painting, and then wipe it clean, but it is very oily. Banana oil is also better, but it is more corrosive.