I regret using uv board as a TV wall. How to repair the beautiful TV wall renderings?

UV board is a board whose surface has been protected by UV treatment. Many families will choose uv board to make TV wall, and the most important thing of uv board is resin raw material. After using uv board, many families feel that the TV wall is not suitable. Upgrade, so how to remedy the regret of using uv board as a TV wall? What are some good-looking TV wall renderings? The editor below will answer it for you.

How to remedy the regret of making a TV wall with UV board

In fact, there are many advantages of UV board. The advantages of UV board background wall:

1. Environmental protection and health. Because it uses environmentally friendly solvent-free UV paint, which can be cured under UV light, the dense protective film formed can reduce the amount of gas released from the substrate and meet environmental and health standards.

2. Specular highlights. Under this special UV process, it gives people a mirror highlight effect, which is very beautiful.

3. Wear-resistant, corrosion-resistant and not easy to discolor.

4. The paint film is plump and the surface is smooth and high-gloss.

5. The effect of imitation marble is remarkable, and the cost is only one-third of real marble, saving customers decoration costs.

6. The UV board is already a finished product. It only needs to be cut on site and then decorated on the wall. There is no need to spray paint, which can save customers decoration time.

If you don’t want to use a marble background board, then it is good to use a UV board. You can also switch to marble, but the cost will be higher.

Construction skills of UV board TV background wall

1. Construction steps of structural adhesive method

(1) Wall pretreatment

First scrape off the putty powder on the wall and remove the dust particles on the wall to ensure the effective adhesion of the structural glue later.

(2) Wall filling

Fill the depressions in the wall with foam glue to make them on a flat surface. If the wall is irregularly shaped or cannot be flattened, Composite panels or plywood can be directly applied.

(3) Structural glue dots

Cut the microcrystalline stone UV decorative plate according to the specifications, and apply structural glue evenly on the back of the plate.

(4) Installation

Press the plate with structural adhesive on the wall according to the decoration style. And ensure uniform and continuous force.

(2) Installation of Yin and Yang corner decorative lines

First nail the moldings on the wall, fix them on the corners with aluminum alloy Yin corners, and then use aluminum alloy tool strips to fix the corners. , that is, nail the aluminum alloy inner corners and aluminum alloy tool strips to the corresponding positions on the wall.

(3) Cutting the board

Cut the microcrystalline stone UV decorative board according to the specifications, saw the UV board into the specified size according to the actual required size, and then smooth the saw edge with sandpaper and clean it, then embed the UV plate between the aluminum alloy inner corner and the tool bar.

The above is the relevant content compiled by the editor about "How to remedy the regret of using UV boards as TV walls".