Wuhan Wedding Room Decoration Trap Harbin Wedding Room Decoration Board

1, solid wood board As the name implies, solid wood board is made of complete wood.

These plates are durable and natural in texture, and are among the best.

However, due to the high cost and high construction technology requirements, the plate has not been used in construction.

Solid wood boards are generally classified according to the entity name of the board, and there is no same size specification.

At present, in addition to the floor and door leaves, artificial wood-based panels are generally used.

2, plywood plywood, also known as plywood, commonly known as thin core board in the industry.

It is made of three or more layers of veneer or thin plate with a thickness of one millimeter by hot pressing.

It is the most commonly used material for handmade furniture at present.

Splints are generally divided into six specifications: 3 cm, 5 cm, 9 cm, 12 cm, 15 cm, 18 cm.

Panel, commonly known as decorative board.

It is a kind of board with single-sided function, which is made by using plywood as the base material and gluing technology to accurately plane solid wood board into a thin veneer with a thickness of about 0.2 mm.

It is a special way of splint, with a thickness of 3 cm.

3, joinery board, commonly known as joinery board.

It is made of two pieces glued and spliced in the middle.

Its price is cheaper than that of thin core board, and its longitudinal bending and compressive strength is poor, but its transverse bending and compressive strength is high.

4. particleboard particleboard is a thin plate made of wood particles as the main raw material, then soaked with glue and pressed.

According to the pressing method, it can be divided into extruded particleboard and flat particleboard.

The main advantage of this kind of plate is that it is extremely cheap.

Its disadvantage is also obvious: its strength is extremely poor.

Generally not suitable for large furniture or furniture with mechanical requirements.

5, density board plate density board, also known as fiberboard.

It is an artificial board made of wood fiber or other plant fiber and urea-formaldehyde resin or other suitable adhesive. According to its density, it is divided into high density board, medium density board and low density board.

High-density board is easy to be reused because of its soft quality and impact resistance.

In foreign countries, MDF is a good furniture material, but the use quality of MDF in China needs to be improved because the national standard of height board is several times lower than the international standard.

6. Fire-proof board Fire-proof board is a board made of siliceous materials or calcareous materials as the main raw materials, with a certain proportion of fiber materials, lightweight aggregates, adhesives and chemicals, which are autoclaved.

It is a new type of material that is used more and more at present, and its use is not only because of fire prevention.

Fire-proof board construction requires higher glue, and the price of fire-proof board with better quality is more expensive than that of panel.

Generally, the thickness of fire protection board is 0.8 mm, 1 mm and 1.2 mm. ..

7. Melamine board Melamine board, the full name of which is melamine impregnated adhesive paper veneer artificial board, is a wall material.

Its process is to soak papers with different colors or textures in melamine resin glue, then dry them to a certain curing degree, spread them on the surface of particleboard, medium density fiberboard or hard fiberboard, and make them into plates by hot pressing.

8. Alec plate Alec plate is a special plexiglass and has the reputation of "plastic queen".

Good color and high transparency.

Its advantages are good weather resistance, transparency and plasticity.

Disadvantages are low hardness, poor heat resistance and low ductility, so it is easy to crack, brittle deformation, unstable color and easy to fluff during use.

In addition, it also contains substances harmful to human body.