How to clean washing equipment such as industrial washing machine in laundry room?

Cleaning washing machines and other equipment can refer to the following methods.

1. Add about 40 liters of water to the industrial washing machine, and then add 300 ml of chlorine bleach. Adjust the washing equipment to a high water level, add bleach, and stir evenly after the water is full. After about twenty minutes, chlorine bleach will thoroughly clean the dirt on the back of the inner barrel of the industrial washing machine. After mixed dehydration, dirt will remain at the bottom of the bucket in the washing equipment. At this time, you need to put water again to completely drain the dirt.

2. Fill the automatic washing machine with water, then add about 100g baking soda to dissolve it in water, let the washing equipment run and roll for 5 minutes, and let it stand for 2 hours. Then the bottom of the automatic washing machine will discharge some dirt, then soak the towel in rice vinegar and put it in the washing equipment to let it sit idle for a while. After being dissolved in water, baking soda contains weak alkalinity, which has a certain cleaning and deodorizing effect, and can also soften the water quality, preventing calcium and magnesium ions in water from forming water-insoluble soap scale and decomposing to form scale and dirt. Rice vinegar also has the function of softening scale and stains, and the combination of the two can achieve effective sterilization and decontamination.

3. Add the clean water of the hotel washing equipment to the high water level, and then pour in the special cleaning agent. Let the equipment run for 5 minutes to fully dissolve the cleaning agent, and the industrial washing machine with heating function can be heated to about 40 degrees, then turn off the power supply of the washing equipment, soak for at least 1 hour, and then clean according to the daily washing mode. After washing, you can see the dirt in the equipment floating on the water.

4. Remove the drain pipe of the washing equipment, put it on the empty bucket, and close the water inlet valve and the front door. Then pour the water in the three kettles into an empty container filled with scale remover, prepare it according to the ratio of L: 2 and stir it evenly, then pour it into the detergent adding box, and press the power switch of the washing equipment to make the washing bucket rotate; After the descaling liquid is discharged from the drain pipe into the bucket, the discharged descaling liquid is added from the detergent adding box, and this is repeated for many times until the program ends, and the filter screen is opened for cleaning. After the cleaning equipment runs, open the water inlet valve, restore the drainage pipe to its original position, then re-select the cleaning program, run it again, and clean the filter again after the program runs.