Traditional Culture Encyclopedia - Hotel franchise - Wuzhou 10p air conditioning fault code

Wuzhou 10p air conditioning fault code

Wuzhou 10p is a common commercial air-conditioning product with excellent refrigeration and heating capacity, which can be used in various commercial places and public places, including hotels, office buildings, shopping malls, hospitals, etc. During use, there may be some faults in the air conditioner. Here are the fault codes of Wuzhou 10p air conditioner and the corresponding solutions.

1.E 1 fault code: indicates that the air filter is blocked, so it is recommended to clean and replace the air filter.

2.P2 fault code: indicates that the indoor temperature sensor is faulty and needs to be replaced.

3.F 1 fault code: indicates that the indoor power supply voltage is too high or too low, and it is necessary to check whether the indoor power supply voltage is normal.

4.F2 fault code: indicates that the outdoor power supply voltage is too high or too low, and it is necessary to check whether the outdoor power supply voltage is normal.

5.E3 fault code: indicates that the refrigerant leaks, and the leaked part needs to be found for repair.

6.E4 fault code: indicates that the communication line between the indoor unit and the outdoor unit is faulty, and it is necessary to check whether the communication line is damaged or dropped.

7.P4 fault code: indicates that the pressure sensor is faulty and needs to be replaced.

8.F4 fault code: indicates that the outdoor temperature is too low in heating mode, and it is necessary to switch to cooling mode.

9.E9 fault code: indicates that the communication between the indoor unit and the outdoor unit control panel has failed, and the control panel needs to be replaced.

10.E0 fault code: indicates that the self-check of operation mode has failed and the equipment needs to be restarted.

The above are the common fault codes of Wuzhou 10p air conditioner and the corresponding solutions. Users need to carefully check the fault code during use and then handle it according to the prompt. If it is not handled properly, it may cause more serious damage to the equipment and even affect its service life. Therefore, timely repair and maintenance is the key to ensure the normal operation of equipment.