How to clean the crystal ceiling lamp

How to clean the crystal ceiling lamp? Gorgeous crystal lamps can be seen hanging from the ceiling in many large spaces, such as living rooms, hotel lobbies and conference rooms. Because it is crystal clear, the cleaning method of crystal ceiling lamp is shared below.

How to clean the crystal ceiling lamp 1 1, lay waterproof floor mats or water-receiving objects, and put them in a good position if a ladder is needed.

2. Prepare all equipment, tools and cleaning agents and put them in place.

3. Take out the high-temperature steam spray gun, press the steam safety cover and turn it counterclockwise to open it.

4. Inject clean water below 350ml (note: it is forbidden to fill the container with water) and tighten it clockwise.

5. Insert the power cord into the 220V AC socket and preheat it for 5-8 minutes to ensure that it is easy to use when cleaning.

6. Remove the capacity cover of the particle ejector. According to the purpose of cleaning the crystal lamp, pour the special cleaning agent into the capacity cover.

7. Add the detergent in the capacity cover to the particle injector, and close the capacity cover tightly. Close the regulating valve before injecting the cleaning agent. The diluted cleaning agent shall not exceed the maximum capacity of 5L box.

8. Connect the particle injector to a 220V power supply. In order to ensure the atomization effect, the motor speed range has been limited at the factory. Please don't disassemble and change it without authorization.

9. Carry the particle ejector on your shoulders, and hold the ejector tube with one hand when working. The front of the box is slightly higher than the back.

10. When working, first press the button at the nozzle to turn on the switch, then gently turn the knob of the regulating valve to adjust the droplet size according to the work needs, and then turn the knob of the governor to adjust the spray speed and distance.

1 1. Before close spraying, reduce the flow rate of the regulating valve appropriately. Impurities are not needed to prevent pipeline blockage.

12. After adjusting the flow rate of the regulating valve, spray the whole crystal lamp for 1-2 minutes, and sprinkle the professional crystal lamp cleaner evenly on all parts.

13. Leave the cleaning agent on the surface of the crystal lamp for 3-5 minutes, so that the special cleaning agent can penetrate into the bottom layer of stains and oil stains on the surface of the crystal lamp to make it fall off, dissolve and emulsify.

14. Every time you turn off the power supply, please raise the nozzle to let the cleaning agent in the cleaning agent pipe flow back into the box to prevent dripping.

15. After the spraying work is completed, remove the residual liquid of excess detergent in the particle injector. Inject clean water, turn on the flow, turn on the machine for a while, dry and save.

16. Using a high-temperature steam spray gun, install the extension hose and insert it into the corresponding position until it is completely sealed.

17. Press the steam button gently to see if the steam can be released. Pull back the steam injection lock, lock the steam button and continue to supply steam. (Keep the power on when using)

18. Spray high-temperature steam evenly to all parts of the crystal lamp to increase the rapid decontamination and degreasing effect of the cleaning agent.

19. after use, unplug the high-temperature steam spray gun, cut off the power supply, press the steam button, and release the steam pressure until no steam is ejected.

20. Pour out all the water in the internal high-temperature steam spray gun, dry it and put it in the toolbox.

2 1. Take out the low-pressure demister, open the cover and inject clean water.

22. Adjust the adjustable nozzle to make it slightly fuzzy.

23. Adjust the air pressure of demister to the highest pressure.

24. Put the low-pressure mist eliminator on your shoulder, lock the spray bar in a foggy state, and spray all parts of the crystal lamp evenly with one hand.

25. After spraying, open the air valve to release the residual air pressure, discharge the residual water and put it into the toolbox.

26. Connect the hair dryer to the 220V power supply, adjust it to the hot air state, and blow dry the residual water on the surface of the crystal lamp.

27. Unplug the hair dryer, tidy up the power cord and put it in the toolbox.

28, tidy up the scene, cleaning, packed all the tools.

How to clean the crystal ceiling lamp? Two tips for choosing crystal lamps:

Different families and spaces have different choices.

When buying crystal lamps, you must pay attention to the choice according to the size of the space and the shape of the lamp. Insiders pointed out that according to the requirements of space, crystal lamps with a diameter of 1 m should be selected for the living room of 20 square meters to 30 square meters. According to different families, you can choose different rooms: many multi-room families mainly choose living rooms, so they mainly choose attractive ceiling lamps and hanging crystal lamps;

Some young people or newlyweds, when decorating their bedrooms, might as well choose exquisite and charming wall-mounted crystal lamps with warm colors and many pendants; If you want to install a crystal lamp in the kitchen, you can install a hanging crystal lamp that can save energy and reflect a warm life.

Look for the brand and prevent the fish from mixing the pearls with the swine.

Most crystal lights on the market start at 1000 yuan. Different brands of crystal lamps have similar appearance. It is worth noting that some unscrupulous manufacturers are just superficial remarks. They install high-quality lamp beads on the periphery or obvious place of larger crystal lamps, and shoddy them on the inner layer or hidden place of the lamps.

In this way, from the appearance, they are very similar to some famous brand lighting, and people usually choose lower prices for the same appearance. As everyone knows, those goods in happy ever after have been spoiled. After a long time, various problems appeared one after another.

Therefore, people must keep their eyes open and choose carefully when choosing. Some manufacturers of brand-name crystal lamps will engrave the brand logo on each crystal ornament to ensure its quality, so that consumers can buy the real brand and use it with confidence. Therefore, if you buy a brand name, you only need to carefully identify the brand logo when buying it.

Pay attention to whether the color lasts. Different grades of crystal lamps have different service lives. Although the difference between high and middle grades is not outstanding, the quality difference between high and low grades is obvious.

When consumers buy crystal lamps, they should first look at its colorful effects, and then look at its gold-plated layer. Generally, high-grade metal fittings are plated with 24K gold, which will not change color and rust for several years. Low-grade metal fittings will lose their original color in two or three months.

After a period of time, the color of the low-grade crystal lamp will darken and the bracket will rust, while the high-grade crystal lamp will not change color for two or three years or even longer.

Shiny, crystal ball is the key.

The reason why the crystal lamp can shine brightly is mainly the purity, cutting surface and lead content of the crystal ball. Therefore, consumers should look at the crystal ball for cracks, bubbles, water ripples and impurities when buying. Only a crystal ball can give full play to the best optical efficiency and make the passing light reflect magnificent colors.

On the cutting surface of the crystal ball, it depends on whether it is smooth and sharp to achieve the best refraction effect of the crystal ball; In terms of lead content, generally high-quality crystal balls will use all-lead crystals, and the lead oxide content is not less than 30%. This is the purest raw material and can emit bright colors.

Pay attention to the brand logo

The quality and price of different brands of crystal lamps will vary greatly. Some well-known brands will engrave the brand logo on each crystal veneer to ensure its quality and prevent confusion, as long as you carefully identify it when buying.

In addition, I need to remind you that some unscrupulous manufacturers are also good at surface work, and the appearance of some imitation crystal lamps can almost rival that of some famous brand lighting. However, it is very likely that they are "beyond the golden jade", such as installing high-quality lamp beads on the periphery or conspicuous place of larger crystal lamps, and shoddy them in the inner layer or hidden place of the lamps. Therefore, you must polish your eyes to get what you like when buying crystal lamps.

How to clean the crystal ceiling lamp? Three skills of choosing lighting.

Large local professional shops are the first choice.

In the past two years, the owners of high-grade houses in provincial capitals like to buy products in Beijing or Guangzhou, where furniture and household products are produced, thinking that there are many styles and cheap prices in these places. The same is true for choosing lamps.

In fact, the lighting industry is developing towards brand management and price integration. Due to the limited sales space in the store, some samples are not displayed, and consumers can choose to order from the electronic atlas and paper atlas in the store. If you buy it in a different place, you can't enjoy free installation and debugging services, and you have to pay for travel and accommodation, which is not worth the candle.

It is very important to choose a good local store. It is necessary to choose a shop with high industry recognition, good reputation, exquisite after-sales service, generous after-sales dispute handling and trustworthy by consumers. It is reported that Yongfeng [Fuzhou] Home Building Materials City 1 Lighting City, the first largest, most complete and professional lighting store in Fujian, is a sales platform integrating retail, wholesale, engineering sample viewing and online display.

The store has: complete and comfortable facilities, adjacent to independent star hotels, high-grade office buildings, all kinds of catering services, and a super-large parking lot with 2000 parking spaces. In the future, consumers in Fujian can save the pain of running around and enjoy the one-stop noble and convenient shopping experience brought by Yongfeng Lighting City.

At the same time, we should pay attention to the following aspects:

Check the sign of the chandelier

When buying a chandelier, you should first check the signs of the chandelier, such as brand, model, rated voltage, rated power, etc. Among them, rated power is particularly important. If the power of the selected chandelier exceeds the standard, the shell and insulation layer may be deformed.

The height of the crane should be appropriate.

The height of the chandelier should be appropriate. It is recommended to use lamps that can be lifted at will to facilitate the adjustment and selection of height. Like the beige chandelier made of plastic, the shape is naturally carved, and the spiral shape of the lampshade can be adjusted at will.

Material selection of chandelier

When buying chandelier materials, we should first look at its function, and its form is subordinate to its function. Where should the chandeliers made of different materials be placed? This must be noted, because some chandelier materials are not suitable for some rooms, especially kitchens and other places.